SPRADA3 july   2023 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1 Introduction
  5. 2 Device Nomenclature
  6. 3 R5 Cores and TCM in AM263x
    1. 3.1 R5 Core Nomenclature in Am263x
  7. 4 Example Support for AM263x Family
  8. 5 IPC Example Support for Two-Core Devices (AM2632)
    1. 5.1 Option 1 Using MulticoreImageGen.js
    2. 5.2 Option Two (Migration Guide from a Four-Core System Project to a Two-Core System Project)
  9. 6 System Project Example Support for Two-Core Devices (AM2632)
  10. 7 Target Configuration in CCS
    1. 7.1 Prerequisites
    2. 7.2 Creating a Target Configuration
  11. 8 Connecting to the Target Core
  12. 9 Hardware Description for Launch Pad and Control Card
    1. 9.1 Launchpad Pinout for Standard Analog Devices
    2. 9.2 ADC and DAC Mapping in Launchpad for Standard Analog
    3. 9.3 Pinmux Mapping - Standard Analog - Launch Pad
    4. 9.4 ADC and DAC Mapping in Control Card for Standard Analog
  13. 10Summary
  14. 11References

9.1 Launchpad Pinout for Standard Analog Devices

GUID-20220510-SS0I-R80R-SQPX-RKWLVDFQXPTS-low.svg Figure 9-1 AM263x Standard Analog Launchpad PinOut

The above picture shows LaunchPad pinout for standard analog devices. In this image, the signals that are shown in color are signals that comply with the LaunchPad BoosterPack Pinout Standard. The signals shown in gray are signals that the AM263x supports, but these signals do not comply with the LP/BP pinout standard. The AM263x LaunchPad supports two fully independent BoosterPack XL connectors. BoosterPack site #1 (J1/J3, J2/J4) is located in between the SoC and the micro-B USB Connector. BoosterPack site #2 (J5/J7, J6/J8) is located in between the SoC and the RJ45 connectors. Each GPIO has multiple functions available through the GPIO mux. The signals connected from the SoC to the BoosterPack headers include:

  • Various ADC inputs
  • DAC Out
  • UART1
  • Various GPIO signals
  • SPI0 and SPI1
  • I2C1 and I2C3
  • Various EPWM Channels
  • LIN1 and LIN2
  • MCAN1
  • SDFM0