Home Power management LED drivers LED display drivers

TLC5930

ACTIVE

12 channel LED driver

Product details

Features Error Flag, Fault Detection, Internal GS Clock, LED Open Detection, PWM LED Driver, Power good Analog dimming steps 64 Data transfer rate (typ) (MHz) 20 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -20 to 85
Features Error Flag, Fault Detection, Internal GS Clock, LED Open Detection, PWM LED Driver, Power good Analog dimming steps 64 Data transfer rate (typ) (MHz) 20 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -20 to 85
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • 0.2-mA to 40-mA (Constant-Current Sink) Drive Capability x 12 Bits Output Count into 24-Pin HTSSOP Package
  • 1024 Gray-Scale Display (PWM Control 1024 Steps) with Max 25-MHz Clock Frequency
  • 3-Way Brightness Adjustment
    • Plane Brightness Adjustment for 64 Steps (40% to 100%)
    • Frequency Division for 16 Steps (6.3% to 100%)
    • Dot Correction for 256 Steps (0% to 100%)
  • DS–Link Data Input/Output (Data Rate Max 20 bps) with Packet Operation
  • 5 Error Information Types and 2 Gray–Scale Clock Modes
  • 3.3-V VCC and LVTTL Interface
  • APPLICATION
    • Full- or Multi-Color LED Display

  • 0.2-mA to 40-mA (Constant-Current Sink) Drive Capability x 12 Bits Output Count into 24-Pin HTSSOP Package
  • 1024 Gray-Scale Display (PWM Control 1024 Steps) with Max 25-MHz Clock Frequency
  • 3-Way Brightness Adjustment
    • Plane Brightness Adjustment for 64 Steps (40% to 100%)
    • Frequency Division for 16 Steps (6.3% to 100%)
    • Dot Correction for 256 Steps (0% to 100%)
  • DS–Link Data Input/Output (Data Rate Max 20 bps) with Packet Operation
  • 5 Error Information Types and 2 Gray–Scale Clock Modes
  • 3.3-V VCC and LVTTL Interface
  • APPLICATION
    • Full- or Multi-Color LED Display

The TLC5930 is a constant-current sink driver with an adjustable current value, and 1024 gray scale display that uses pulse width control. The output current is 0.2 mA to 40 mA with 12 bits of RGBx4. The maximum current value of the constant-current output can be set by one external resistor.

The TLC5930 includes three kinds of brightness adjustment functions: one adjusts the plane brightness between devices, changing the current values of all outputs uniformly. The second adjusts the frequency division to controls overall panel brightness, and the third adjusts the dot correction per LED, changing the current values of independent output.

The TLC5930 also includes color–tone correction function for correcting color per dot (pixel) and OVM function for constant-current output terminals used for LED failure detection.

Other features include the thermal error flag (TEF). The active wire-check (AWC) to check the communication between the controller and the device. The LED leakage-detect (LKD) to detect the reverse leakage on the LED. The GCLK error flag (GEF) and the HSYNC error flag (HEF) by monitoring the gray-scale clock count, and the dual source gray-scale clock (DSG) function to switch the gray-scale clock to the external input clock or to switch the internally-generated clock.

The TLC5930 requires three signals for standard operation: data input and gray-scale clock. Only three-signal line and 24-pin HTSSOP package reduce board area and total cost.

The TLC5930 is a constant-current sink driver with an adjustable current value, and 1024 gray scale display that uses pulse width control. The output current is 0.2 mA to 40 mA with 12 bits of RGBx4. The maximum current value of the constant-current output can be set by one external resistor.

The TLC5930 includes three kinds of brightness adjustment functions: one adjusts the plane brightness between devices, changing the current values of all outputs uniformly. The second adjusts the frequency division to controls overall panel brightness, and the third adjusts the dot correction per LED, changing the current values of independent output.

The TLC5930 also includes color–tone correction function for correcting color per dot (pixel) and OVM function for constant-current output terminals used for LED failure detection.

Other features include the thermal error flag (TEF). The active wire-check (AWC) to check the communication between the controller and the device. The LED leakage-detect (LKD) to detect the reverse leakage on the LED. The GCLK error flag (GEF) and the HSYNC error flag (HEF) by monitoring the gray-scale clock count, and the dual source gray-scale clock (DSG) function to switch the gray-scale clock to the external input clock or to switch the internally-generated clock.

The TLC5930 requires three signals for standard operation: data input and gray-scale clock. Only three-signal line and 24-pin HTSSOP package reduce board area and total cost.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet 12 Channel LED Driver datasheet 09 May 2002
White paper Common LED Functions and LED Driver Design Considerations 21 Sep 2020
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins CAD symbols, footprints & 3D models
HTSSOP (PWP) 24 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos