TPSM82480 5.5V Input, 6A, Step-Down Converter Module With Integrated Inductor | TI.com

TPSM82480 (ACTIVE)

5.5V Input, 6A, Step-Down Converter Module With Integrated Inductor

5.5V Input, 6A, Step-Down Converter Module With Integrated Inductor - TPSM82480
 

Description

The TPSM82480 is a synchronous step-down DC-DC converter module for low profile point-of-load power supplies. The input voltage range of 2.4 to 5.5 V enables operation from typical 3.3-V or 5-V interface supplies as well as from backup circuits dropping down as low as 2.4 V.

The output current is up to 6 A continuously provided by two phases of 3 A each, which run out-of-phase, reducing pulse current noise significantly.

The TPSM82480 provides an automatically entered power save mode to maintain high efficiency down to very light loads. This incorporates an automatic phase adding and shedding feature using both or only one phase according to the actual load. The power save mode can be switched off using the MODE feature.

The device offers a Power Good signal and an adjustable soft start. Also, the device features a Thermal Good signal to indicate excessive internal temperature. The output voltage can be changed to a preselected value by VSEL pin. TPSM82480 is able to operate in 100% duty cycle mode.

Features

  • Ultra Small 7.9 x 3.6 x 1.5 mm Power Module
  • Output Current of 6 A
  • Feedback Voltage Accuracy of ±1%
  • Input Voltage Range 2.4 to 5.5 V
  • Output Voltage Range 0.6 to 5.5 V
  • Typical Quiescent Current of 23 µA
  • Output Voltage Select
  • Phase Shifted Operation
  • Automatic Power Save Modes
  • Forced PWM Mode Option
  • Adjustable Soft Start
  • Power Good & Thermal Good Outputs
  • Undervoltage Lockout
  • Over-current and Short-Circuit Protection
  • Over-temperature Protection
  • -40°C to 125°C Operating Temperature Range

All trademarks are the property of their respective owners.

View more

Parametrics Compare all products in Step-Down (Buck) Module

 
Iout (Max) (A)
Vin (Min) (V)
Vin (Max) (V)
Vout (Min) (V)
Vout (Max) (V)
Soft Start
Features
Iq (Typ) (mA)
Regulated Outputs (#)
Package Size: mm2:W x L (PKG)
Switching Frequency (Typ) (kHz)
Topology
Operating Temperature Range (C)
Pin/Package
Rating
TPSM82480
6    
2.4    
5.5    
0.6    
5.5    
Adjustable    
EMI Tested
Enable
Light Load Efficiency
Output Discharge
Power Good
Tracking    
0.023    
1    
See datasheet (QFM)    
2200    
Buck
Synchronous Buck    
-40 to 125    
24QFM    
Catalog    
New!
WEBENCH® Power Designer is now even easier to use. Try it now.

WEBENCH® Designer TPSM82480

  Min   Max Range
Vin  V 2.4 to 5.5V
Vout  V 0.6 to 5.5V
Iout  A ≤ 6A
Ambient Temp  °C -40 to 125°C


Footprint BOM Cost Efficiency


Preview design