Precision, ±250mV Input, 3µs Delay, Reinforced Isolated Amplifier - AMC1301


Precision, ±250mV Input, 3µs Delay, Reinforced Isolated Amplifier



The AMC1301 device is a precision, isolated amplifier with an output separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 7 kVPEAK according to VDE V 0884-10 and UL1577. Used in conjunction with isolated power supplies, this device prevents noise currents on a high common-mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry.

The input of the AMC1301 device is optimized for direct connection to shunt resistors or other low voltage-level signal sources. The excellent performance of the device supports accurate current control resulting in system-level power savings and, especially in motor control applications, lower torque ripple. The integrated common-mode overvoltage and missing high-side supply voltage detection features of the AMC1301 device simplify system-level design and diagnostics.

The AMC1301 device is fully specified over the extended industrial temperature range of –40°C to +125°C and is available in a wide-body 8-pin SOIC (DWV) package.


  • ±250-mV Input Voltage Range Optimized for
    Current Measurement Using Shunt Resistors
  • Low Offset Error and Drift:
    ±200 µV at 25°C, ± 3 µV/°C
  • Fixed Gain: 8.2
  • Very Low Gain Error and Drift:
    ±0.3% at 25°C, ± 50 ppm/°C
  • Very Low Nonlinearity and Drift:
    0.03%, 1 ppm/°C
  • 3.3-V Operation on High-Side and Low-Side
  • System-Level Diagnostic Features
  • Safety-Related Certifications:
    • 7000-VPK Reinforced Isolation per
      DIN V VDE V 0884-10 (VDE V 0884-10):
    • 5000-VRMS Isolation for 1 Minute per UL1577
    • CAN/CSA No. 5A-Component Acceptance
      Service Notice, IEC 60950-1,
      and IEC 60065 End Equipment Standards
  • Fully Specified Over the Extended Industrial Temperature Range

View more

Parametrics Compare all products in Isolated Amplifiers

Common Mode Rejection Ratio (Typ) (dB)
Isolation Working Voltage VIOWM (rms) (V)
Isolation Transient Overvoltage VIOTM (Peak) (V)
Small Signal Bandwidth (Typ) (kHz)
Gain Non-Linearity (+/-) (Max) (%)
CMTI (Min) (kV/µs)
Operating Temperature Range (C)
AMC1301 AMC1100 AMC1200 AMC1200-Q1 AMC1301-Q1
92    108    108    108    92   
1000    800    800    800    1000   
7000    4250    4250    4250    7000   
210    100    100    100    210   
0.03    0.075    0.075    0.075    0.03   
15    2.5    10    10    15   
Catalog    Catalog    Catalog    Automotive    Automotive   
-40 to 125    -40 to 105    -40 to 105    -40 to 105    -40 to 125   

Other qualified versions of AMC1301

Version Part Number Definition
Automotive AMC1301-Q1 Q100 devices qualified for high-reliability automotive applications targeting zero defects