Produktdetails

Illumination wavelength (min) (nm) 700 Illumination wavelength (max) (nm) 2500 Micromirror array size 854 x 480 Chipset family DLP2010NIR Micromirror pitch (mm) 0.0054 Component type DMD Micromirror array orientation Orthogonal Pattern rate, binary (max) (Hz) 2880 Array diagonal (in) 0.2 Display resolution (max) WVGA Rating Catalog Operating temperature range (°C) 0 to 70 Micromirror driver support Integrated Thermal dissipation (°C/W) 7.9
Illumination wavelength (min) (nm) 700 Illumination wavelength (max) (nm) 2500 Micromirror array size 854 x 480 Chipset family DLP2010NIR Micromirror pitch (mm) 0.0054 Component type DMD Micromirror array orientation Orthogonal Pattern rate, binary (max) (Hz) 2880 Array diagonal (in) 0.2 Display resolution (max) WVGA Rating Catalog Operating temperature range (°C) 0 to 70 Micromirror driver support Integrated Thermal dissipation (°C/W) 7.9
DLP-S244 (FQJ) 40 84.27 mm² 15.9 x 5.3
  • 0.2-inch (5.29-mm) Diagonal Micromirror Array
    • 854 × 480 Array of Aluminum Micrometer-Sized Mirrors, in an Orthogonal Layout
    • 5.4-µm Micromirror Pitch
    • ±17° Micromirror Tilt (Relative to Flat Surface)
    • Side Illumination for Optimal Efficiency and Optical Engine Size
  • Highly Efficient Steering of NIR light
    • Window Transmission Efficiency 96% Nominal (700 to 2000 nm, Single Pass Through Two Window Surfaces)
    • Window Transmission Efficiency 90% Nominal (2000 to 2500 nm, Single Pass Through Two Window Surfaces)
    • Polarization Independent Aluminum Micromirrors
  • Dedicated DLPC150/DLPC3470 Controllers for Reliable Operation
    • Binary Pattern Rates up to 2880 Hz
    • Pattern Sequence Mode for Control over Each Micromirror in Array
  • Dedicated Power Management Integrated Circuit (PMIC) DLPA2000 or DLPA2005 for Reliable Operation
  • 15.9-mm × 5.3-mm × 4-mm Body Size for Portable Instruments
  • 0.2-inch (5.29-mm) Diagonal Micromirror Array
    • 854 × 480 Array of Aluminum Micrometer-Sized Mirrors, in an Orthogonal Layout
    • 5.4-µm Micromirror Pitch
    • ±17° Micromirror Tilt (Relative to Flat Surface)
    • Side Illumination for Optimal Efficiency and Optical Engine Size
  • Highly Efficient Steering of NIR light
    • Window Transmission Efficiency 96% Nominal (700 to 2000 nm, Single Pass Through Two Window Surfaces)
    • Window Transmission Efficiency 90% Nominal (2000 to 2500 nm, Single Pass Through Two Window Surfaces)
    • Polarization Independent Aluminum Micromirrors
  • Dedicated DLPC150/DLPC3470 Controllers for Reliable Operation
    • Binary Pattern Rates up to 2880 Hz
    • Pattern Sequence Mode for Control over Each Micromirror in Array
  • Dedicated Power Management Integrated Circuit (PMIC) DLPA2000 or DLPA2005 for Reliable Operation
  • 15.9-mm × 5.3-mm × 4-mm Body Size for Portable Instruments

The DLP2010NIR digital micromirror device (DMD) acts as a spatial light modulator (SLM) to steer near-infrared (NIR) light and create patterns with speed, precision, and efficiency. Featuring high resolution in a compact form factor, the DLP2010NIR DMD is often combined with a grating single element detector to replace expensive InGaAs linear array-based detector designs, leading to high performance, cost-effective portable NIR Spectroscopy solutions. The DLP2010NIR DMD enables wavelength control and programmable spectrum and is well suited for low power mobile applications such as 3D biometrics, facial recognition, skin analysis, material identification and chemical sensing.

The DLP2010NIR digital micromirror device (DMD) acts as a spatial light modulator (SLM) to steer near-infrared (NIR) light and create patterns with speed, precision, and efficiency. Featuring high resolution in a compact form factor, the DLP2010NIR DMD is often combined with a grating single element detector to replace expensive InGaAs linear array-based detector designs, leading to high performance, cost-effective portable NIR Spectroscopy solutions. The DLP2010NIR DMD enables wavelength control and programmable spectrum and is well suited for low power mobile applications such as 3D biometrics, facial recognition, skin analysis, material identification and chemical sensing.

Herunterladen Video mit Transkript ansehen Video
„Informationen“

Weitere Informationen anfordern

Für die weitere Entwicklung benötigen Sie ein optisches Modul. Sehen Sie sich das Suchtool für optische Module an, um ein optisches Modul auszuwählen, welches mit Ihrem DMD kompatibel ist. Weitere Informationen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 21
Typ Titel Datum
* Data sheet DLP2010NIR (.2 WVGA Near-Infrared DMD) datasheet (Rev. B) PDF | HTML 19 Mai 2022
Application brief Highly Scalable TI DLP Technology for 3D Machine Vision PDF | HTML 06 Jul 2021
Application note Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 17 Dez 2019
Application note Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) 27 Nov 2018
White paper High accuracy 3D scanning using Texas Instruments DLP® technology for structured (Rev. A) 25 Sep 2018
Technical article Capture, imagine, create: Enabling highly-accurate desktop 3D printing and portabl PDF | HTML 10 Jul 2018
Application note DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 23 Feb 2018
EVM User's guide DLP NIRscan Nano EVM (Rev. G) 03 Aug 2017
Technical article Capturing the “digital signature” – A new approach to material analysis PDF | HTML 17 Nov 2016
Application note Optimizing the DLP® Spectrometer Signal Chain 14 Sep 2016
Solution guide TI DLP® Technology for Spectroscopy (Rev. B) 08 Apr 2016
Application note DLP® Series-244 DMD and System Mounting Concepts Mech and Therm App Report 30 Mär 2016
User guide DLPC150 Programmer's Guide (Rev. A) 24 Feb 2016
Technical article Chocolate challenge! See how spectroscopy can give you answers. PDF | HTML 11 Feb 2016
Application note DLP® NIRscan™ Nano Optical Design Considerations 14 Jan 2016
Technical article Taking a look inside the DLP® NIRscan™ Nano Evaluation Module PDF | HTML 15 Okt 2015
Technical article TI DLP® NIRscan™ Nano Evaluation Module has answers to your handheld near-infrared PDF | HTML 02 Okt 2015
White paper DLP Technology for Spectroscopy (Rev. A) 15 Aug 2015
Technical article From crops to store shelves, the future is looking bright for near-infrared spectr PDF | HTML 01 Mai 2015
Application note DLP Spectrometer Design Considerations 21 Aug 2014
Application note Geometric Optics for DLP® 05 Dez 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DLPNIRNANOEVM — DLP® NIRscan™-Nano-Evaluierungsmodul

The DLP NIRscan Nano is a compact battery-operated evaluation module (EVM) for portable near-infrared spectroscopy solutions. Featuring the DLP2010NIR digital micromirror device (DMD), the NIRscan Nano supports Bluetooth low energy to enable mobile lab measurements for hand-held spectrometers. The (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

OPTECKS-3P-TNIR — DLP(R) NIRscan Nano Transmissive EVM (Evaluierungsmodule und Platinen)

The DLP NIRscan nano transmissive EVM is designed for performing spectroscopic measurements on samples in the near infrared spectrum. The high performance transmissive module positions a sample between the illuminating source and the input of the NIRscan Nano to allow spectroscopic measurements (...)

Optisches Modul

DLP-OMM-SEARCH — Suchtool für optische Module von DLP®-Produkten

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

Optisches Modul

INNOS-3P-DLP2010NIRMOD — Inno Spectra DLP2010NIR-Spektrometermodule

InnoSpectra is fully engaged in DLP technology and has continued to carry out innovative developments based on their outstanding management and R&D capabilities, using optical, electronic and software technologies. InnoSpectra provides miniaturized, cost-effective, non-destructive testing (...)
Codebeispiel oder Demo

KST-3P-DLP2010NIR — KS Technologies Quellcode für NIRScanNano Demo-App + SDK

The source code for a NIRScanNano Demo app + SDK is made freely available on KST's github repository. This allows you to very quickly get up-and-running as a mobile developer wishing to take advantage of the NIRScan Nano's capabilities. The SDK allows easy integration into your shipping, native (...)
Firmware

DLPC100 DLPC150 Configuration and Support Firmware v2.0.0 (Rev. D)

lock = Nur mit Exportgenehmigung (1 Minute)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Produkte für Spektroskopie & optische Netzwerke
DLP2010NIR DLP® – 0.2 WVGA NIR DMD DLPC150 Digitaler Controller für das DLP2010NIR-DMD
Hardware-Entwicklung
Evaluierungsplatine
DLPNIRNANOEVM DLP® NIRscan™-Nano-Evaluierungsmodul
Software
Firmware
DLPR150 DLPC150 Konfigurations- und Support-Firmware
Firmware

DLPC115 DLPC150 Configuration and Support Firmware v2.3.1

lock = Nur mit Exportgenehmigung (1 Minute)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Produkte für Spektroskopie & optische Netzwerke
DLP2010NIR DLP® – 0.2 WVGA NIR DMD DLPC150 Digitaler Controller für das DLP2010NIR-DMD
Hardware-Entwicklung
Evaluierungsplatine
DLPNIRNANOEVM DLP® NIRscan™-Nano-Evaluierungsmodul
Software
Firmware
DLPR150 DLPC150 Konfigurations- und Support-Firmware
Firmware

DLPR150 — DLPC150 Konfigurations- und Support-Firmware

The DLPR150 configuration and support firmware enables broad functionality of the DLPC150 digital controller. The DLPC150 offers reliable operation of DLP2010NIR digital micromirror device (DMD).Combined with the DLPC150 controller, the DLPR150 firmware provides developers with a flexible interface (...)
Simulationsmodell

DLP2010NIRFQJ IBIS Model

DLPM012.ZIP (18 KB) - IBIS Model
3D DMD mechanische Geometrie

DLPM039 DLP2010 DMD With FQJ Package (Series 244) 3D-CAD Geometry

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Produkte für Spektroskopie & optische Netzwerke
DLP2010NIR DLP® – 0.2 WVGA NIR DMD
Pico-Produkte mit Array ≤ 0,47 Zoll
DLP2010 Digitales DLP®-Mikrospiegelarray (DMD), WVGA, 0,20 Zoll
Produkte für sichtbares Licht (420 bis 700 nm)
DLP2010LC Digitales DLP®-Mikrospiegelarray (DMD), 0,2 Zoll, WVGA
Designs für DMD-Montagelösungen

DLPR067 Series 244 DMD Mounting and Electrical Interconnect Information

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Produkte für Spektroskopie & optische Netzwerke
DLP2010NIR DLP® – 0.2 WVGA NIR DMD
Pico-Produkte mit Array ≤ 0,47 Zoll
DLP2010 Digitales DLP®-Mikrospiegelarray (DMD), WVGA, 0,20 Zoll
Produkte für sichtbares Licht (420 bis 700 nm)
DLP2010LC Digitales DLP®-Mikrospiegelarray (DMD), 0,2 Zoll, WVGA
Referenzdesigns

TIDA-00554 — Ultramobiles DLP-NIR-Spektrometer für tragbare chemische Analysegeräte mit Bluetooth-Konnektivität

The ultra-mobile near-infrared (NIR) spectrometer reference design utilizes Texas Instruments' DLP technology in conjunction with a single-element InGaAs detector to deliver high performance measurements in a portable form factor that is more affordable than architectures using an expensive InGaAs (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins Herunterladen
DLP-S244 (FQJ) 40 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos