Startseite Motortreiber Treiber für bürstenlose Gleichstrommotoren (BLDC) BLDC-Treiber
Startseite
Motortreiber
Treiber für bürstenlose Gleichstrommotoren (BLDC)
BLDC-Treiber

DRV8353M

AKTIV

Maximal 3-phasiger intelligenter Gate-Treiber, 102 V, mit Strom-Shunt-Verstärkern und erweitertem Te

Jetzt bestellen
Datenblatt

DRV8353M

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 9 Vs ABS (max) (V) 102 Features Current sense Amplifier, Hardware Management I/F, SPI/I2C, Smart Gate Drive Operating temperature range (°C) -55 to 125
Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 9 Vs ABS (max) (V) 102 Features Current sense Amplifier, Hardware Management I/F, SPI/I2C, Smart Gate Drive Operating temperature range (°C) -55 to 125
WQFN (RTA) 40 36 mm² 6 x 6
  • 9 to 100-V, Triple half-bridge gate driver

    • Extended TA operation -55 °C to 125 °C

    • Optional triple low-side current shunt amplifiers
  • Smart gate drive architecture
    • Adjustable slew rate control for EMI performance
    • VGS handshake and minimum dead-time insertion to prevent shoot-through
    • 50-mA to 1-A peak source current
    • 100-mA to 2-A peak sink current
    • dV/dt mitigation through strong pulldown
  • Integrated gate driver power supplies
    • High-side doubler charge pump For 100% PWM duty cycle control
    • Low-side linear regulator
  • Integrated triple current shunt amplifiers
    • Adjustable gain (5, 10, 20, 40 V/V)
    • Bidirectional or unidirectional support
  • 6x, 3x, 1x, and independent PWM modes
    • Supports 120° sensored operation
  • SPI or hardware interface available
  • Low-power sleep mode (20 µA at VVM = 48-V)
  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Gate drive supply undervoltage (GDUV)
    • MOSFET VDS overcurrent protection (OCP)
    • MOSFET shoot-through prevention
    • Gate driver fault (GDF)
    • Thermal warning and shutdown (OTW/OTSD)
    • Fault condition indicator (nFAULT)
  • 9 to 100-V, Triple half-bridge gate driver

    • Extended TA operation -55 °C to 125 °C

    • Optional triple low-side current shunt amplifiers
  • Smart gate drive architecture
    • Adjustable slew rate control for EMI performance
    • VGS handshake and minimum dead-time insertion to prevent shoot-through
    • 50-mA to 1-A peak source current
    • 100-mA to 2-A peak sink current
    • dV/dt mitigation through strong pulldown
  • Integrated gate driver power supplies
    • High-side doubler charge pump For 100% PWM duty cycle control
    • Low-side linear regulator
  • Integrated triple current shunt amplifiers
    • Adjustable gain (5, 10, 20, 40 V/V)
    • Bidirectional or unidirectional support
  • 6x, 3x, 1x, and independent PWM modes
    • Supports 120° sensored operation
  • SPI or hardware interface available
  • Low-power sleep mode (20 µA at VVM = 48-V)
  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Gate drive supply undervoltage (GDUV)
    • MOSFET VDS overcurrent protection (OCP)
    • MOSFET shoot-through prevention
    • Gate driver fault (GDF)
    • Thermal warning and shutdown (OTW/OTSD)
    • Fault condition indicator (nFAULT)

The DRV8353M family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field-oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller.

The DRV8353M uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events

Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.

The DRV8353M family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field-oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller.

The DRV8353M uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events

Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.
open-in-new Andere BLDC-Treiber suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
DRV8300 AKTIV Einfacher dreiphasiger Gate-Treiber für max. 100 V mit Bootstrap-Dioden The new device is easy to use with HW interface to MCU and is available in smaller package.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet DRV8353M 100-V Three-Phase Smart Gate Driver datasheet PDF | HTML 31 Mär 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DRV8353RH-EVM — DRV8353RH – Dreiphasiges Smart Gate-Treiber-Evaluierungsmodul

The DRV8353RH-EVM is a 15A, 3-phase brushless DC drive stage based on the DRV8353RH gate driver and CSD19532Q5B NexFET™ MOSFETs.

The module has individual DC bus and phase voltage sense as well as individual low-side current shunt amplifiers, making this evaluation module ideal for sensorless BLDC (...)

Benutzerhandbuch: PDF
Optionen anzeigen
Evaluierungsplatine

DRV8353RS-EVM — DRV8353RS-Dreiphasiges Smart Gate-Treiber-Evaluierungsmodul

The DRV8353RS-EVM is a 15A, 3-phase brushless DC drive stage based on the DRV8353RS gate driver and CSD19532Q5B NexFET™ MOSFETs.

The module has individual DC bus and phase voltage sense as well as individual low-side current shunt amplifiers, making this evaluation module ideal for sensorless BLDC (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Berechnungstool

BLDC-MAX-QG-MOSFET-CALCULATOR — Calculate the maximum QG MOSFET for your motor driver

Calculate the maximum QG MOSFET that can be driven based on the PWM switching frequency, algorithm type, and additional external capacitance.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
BLDC-Treiber
DRV8320 — 3-phasiger intelligenter Gate-Treiber, max. 65 V DRV8320R — Maximal dreiphasiger intelligenter Gate-Treiber für 65 V mit Abwärtsregler DRV8323 — 3-phasiger intelligenter Gate-Treiber, max. 65 V, mit Strom-Shunt-Verstärkern DRV8323R — Maximal dreiphasiger intelligenter Gate-Treiber für 65 V mit Abwärtsregler und Strom-Shunt-Verstärke DRV8329 — Dreiphasiger intelligenter Gate-Treiber (60 V) mit drei Strom-Shunt-Verstärkern DRV8329-Q1 — Dreiphasiger Gate-Treiber (60 V) für die Automobilindustrie mit einem Strommessverstärker DRV8334 — 3-Phasen-Gate-Treiber, 60 V, 1000 mA bis 2000 mA, mit genauer Strommessung DRV8340-Q1 — 12-bis-24-V-Batterie-3-Phasen-Smart-Gate-Treiber DRV8343-Q1 — 12-bis-24-V-Batterie-3-Phasen-Smart-Gate-Treiber mit Strom-Shunt-Verstärkern für die Automobilind DRV8350 — 3-phasiger intelligenter Gate-Treiber, max. 102 V DRV8350F — 102-V max. 3-phasiger Smart Gate-Treiber, qualifiziert für Funktionssicherheitsapplikationen DRV8350R — Maximal 3-phasiger intelligenter Gate-Treiber, 102 V, mit Abwärtsregler DRV8353 — 3-phasiger intelligenter Gate-Treiber, max. 102 V, mit Strom-Shunt-Verstärkern DRV8353F — 102-V max. 3-phasiger Smart Gate-Treiber mit 3x CSA, qualifiziert für Funktionssicherheitsapplikatio DRV8353M — Maximal 3-phasiger intelligenter Gate-Treiber, 102 V, mit Strom-Shunt-Verstärkern und erweitertem Te DRV8353R — Maximal dreiphasiger intelligenter Gate-Treiber für 102 V mit Abwärtsregler und Strom-Shunt-Verstärk
Herunterladen
Gehäuse Pins Herunterladen
WQFN (RTA) 40 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos