TUSB9260
SuperSpeed USB 3.0 zu Serial AT-Brücke
TUSB9260
- Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant - TID 340000007
- Integrated Transceiver Supports SS/HS/FS Signaling
- Best in Class Adaptive Equalizer
- Allows for Greater Jitter Tolerance in the Receiver
- USB Class Support
- USB Attached SCSI Protocol (UASP)
- USB Mass Storage Class Bulk-Only Transport (BOT)
- Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)
- USB Bootability Support
- USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a TI Provided Application
- SuperSpeed USB 3.0 Compliant - TID 340000007
- SATA Interface
- Serial ATA Specification Revision 2.6
- gen1i, gen1m, gen2i, and gen2m
- Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification
- Serial ATA Specification Revision 2.6
- Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded From EEPROM Via SPI Interface
- Two Additional SPI Port Chip Selects for Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
- 2 GPIOs Have PWM Functionality for LED Blink Speed Control
- Serial Communications Interface for Debug (UART)
- General Features
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and IEEE1149.6 Boundary Scan
- Available in a Fully RoHS Compliant Package
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Target Applications
- External HDD/SSD
- External DVD
- External CD
- HDD-Based Portable Media Player
The TUSB9260 is an ARM cortex M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP) compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class bulk-only transport (BOT), and USB human interface device (HID) interfaces.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | USB 3.0 to SATA Bridge. datasheet (Rev. D) | 09 Mai 2011 | |
* | Errata | TUSB9260 Errata | 27 Okt 2010 | |
User guide | TUSB9260 Flash Burner - User Guide (Rev. D) | 24 Okt 2013 | ||
Application note | TUSB9260 Implementation Guide (Rev. C) | 22 Feb 2011 | ||
User guide | TUSB9260DEMO User's Guide (Rev. B) | 22 Feb 2011 | ||
User guide | TUSB926x SpeedBoost Monitor User's Guide | 23 Sep 2010 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
SLLC421 — TUSB926x Firmware, U1/U2 Enabled
SLLC414 — TUSB926x FlashBurner Utility
Unterstützte Produkte und Hardware
Produkte
USB-Hubs und -Controller
SLLC415 — TUSB926x SpeedBoost Monitor
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
TINA-TI — SPICE-basiertes analoges Simulationsprogramm
Gehäuse | Pins | Herunterladen |
---|---|---|
HTQFP (PVP) | 64 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.