The TPS2492 and TPS2493 are easy-to-use, positive high voltage, 14-pin Hotswap Controllers that safely drive an external N-channel FET to control load current. The programmable power foldback protection ensures that the external FET operates inside its safe operating area (SOA) during overload conditions by controlling of power dissipation. The programmable current limit and fault timer ensure the supply, external FET, and load are not harmed by overcurrent. Features include inrush current limiting, controlled load turn-on, interfacing to down-stream DC-to-DC converters, and power feed protection.
The analog current monitor output provides a signal ready for sampling with an external A/D converter.
Additional features include programmable overvoltage and undervoltage shutdown, power-good for coordinating loads with inrush, and a fault indicator to indicate an over-current shutdown.
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | Positive High-Voltage Power-Limiting Hotswap Controller datasheet (Rev. C) | 2013/01/15 | |
| E-book | 11 Ways to Protect Your Power Path | 2019/07/03 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | Surge Stopping and Reverse Voltage Protection with the LM5069 | 2013/04/11 | ||
| User guide | Using the TPS2492/3 Hot Swap Controller (Rev. A) | 2011/03/19 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The TPS2492EVM-003 is a fully assembled and tested circuit for evaluating the TPS2492 positive high-voltage power-limiting hot swap controller with analog current monitor output. The TPS2492EVM-003 accepts a 1VDC to 48VDC input and delivers a 48VDC, 1-A maximum output with the latch off mode. The (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| TSSOP (PW) | 14 | 옵션 보기 |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.
제품 세부 정보 페이지에서 지원을 확인하십시오.
TVS diode recommendation tool
Initial release of TVS diode recommendation tool.