전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS54062

활성

저 IQ, 4.7V~60V 입력, 50mA 동기형 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 LMR36500 활성 6μA IQ의 3V~65V, 50mA 초소형 동기 벅 컨버터 Smaller footprint, lower IQ and greater switching frequency capability.
LMR36503 활성 6μA IQ의 3V~65V, 0.3A 초소형 동기 벅 컨버터 Smaller footprint, lower IQ and lower EMI.

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 0.05 Vin (min) (V) 4.7 Vin (max) (V) 60 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 400 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 58 Iq (typ) (A) 0.000089
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 0.05 Vin (min) (V) 4.7 Vin (max) (V) 60 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 400 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 58 Iq (typ) (A) 0.000089
VSON (DRB) 8 9 mm² 3 x 3 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Integrated High-Side and Low-Side MOSFET
  • Peak Current Mode Control
  • Diode Emulation for Improved Light-Load Efficiency
  • 89 µA (typical) Operating Quiescent Current
  • 100-kHz to 400-kHz Adjustable Switching Frequency
  • Synchronizes to External Clock
  • Internal Slow-Start
  • 0.8 V ±2% Voltage Reference
  • Stable with Ceramic Output Capacitors or Low-Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • MSOP-8 and 3mm × 3mm VSON-8 Packages
  • Integrated High-Side and Low-Side MOSFET
  • Peak Current Mode Control
  • Diode Emulation for Improved Light-Load Efficiency
  • 89 µA (typical) Operating Quiescent Current
  • 100-kHz to 400-kHz Adjustable Switching Frequency
  • Synchronizes to External Clock
  • Internal Slow-Start
  • 0.8 V ±2% Voltage Reference
  • Stable with Ceramic Output Capacitors or Low-Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • MSOP-8 and 3mm × 3mm VSON-8 Packages

The TPS54062 device is a 60-V, 50-mA, synchronous step-down converter with integrated high-side and low-side MOSFETs. Current mode control provides simple external compensation and flexible component selection. The non-switching supply current is 89 µA. Using the enable pin, shutdown supply current is reduced to 1.7 µA.

Undervoltage lockout is internally set at 4.5 V, but can be increased using the accurate enable pin threshold. The output voltage start-up ramp is controlled by the internal slow-start time.

Adjustable switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.

The TPS54062 device is a 60-V, 50-mA, synchronous step-down converter with integrated high-side and low-side MOSFETs. Current mode control provides simple external compensation and flexible component selection. The non-switching supply current is 89 µA. Using the enable pin, shutdown supply current is reduced to 1.7 µA.

Undervoltage lockout is internally set at 4.5 V, but can be increased using the accurate enable pin threshold. The output voltage start-up ramp is controlled by the internal slow-start time.

Adjustable switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기7
유형 직함 날짜
* Data sheet TPS54062 4.7-V to 60-V Input, 50-mA Synchronous Step-Down Converter With Low IQ datasheet (Rev. D) PDF | HTML 2016/07/21
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Using the TPS54061 to Create an Inverting Power Supply 2012/07/17
EVM User's guide TPS54062EVM-695, 0.05-A, SWIFT(TM) Regulator Evaluation Module (Rev. A) 2012/02/15
Application note Improved Load Current Capability for Cap-Drop Off-Line Power Supply for E-Meter 2011/10/27
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS54062EVM-695 — TPS54062 동기 스텝다운 컨버터용 평가 모듈

The TPS54062EVM-695 is a fully assembled and tested circuit for evaluating the TPS54062 Synchronous Step-Down SWIFT Converter. The TPS54062EVM-695 operates from an 8V to 60V input (24V nominal) and provides a 3.3V output at 50mA.
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS54062 PSPICE Transient Model

SLVM262.ZIP (59 KB) - PSpice Model
시뮬레이션 모델

TPS54062 TINA-TI Transient Reference Design

SLVM609.TSC (245 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS54062 TINA-TI Transient Spice Model

SLVM608.ZIP (54 KB) - TINA-TI Spice Model
시뮬레이션 모델

TPS54062 Unencrypted PSpice Transient Model

SLVMCZ4.ZIP (6 KB) - PSpice Model
계산 툴

SLVC364 TPS54062 Calculator Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS54062 저 IQ, 4.7V~60V 입력, 50mA 동기형 스텝다운 컨버터
계산 툴

SLVC392 Capacitor Drop Design Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS5401 3.5V~42V 입력, 0.5A 스텝 다운 컨버터 TPS54060 Eco-모드를 지원하는 3.5V~60V 입력, 0.5A 스텝다운 컨버터 TPS54060-EP TPS54060-EP- 0.5A, 60V 스텝다운 DC/DC 컨버터(Eco-Mode 지원) TPS54062 저 IQ, 4.7V~60V 입력, 50mA 동기형 스텝다운 컨버터
계산 툴

SLVC439 Synchronous Inverting Buck Boost Design Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS54061 저 IQ, 4.7V~60V 입력, 200mA 동기형 스텝다운 컨버터 TPS54062 저 IQ, 4.7V~60V 입력, 50mA 동기형 스텝다운 컨버터 TPS54320 4.5V~17V 입력, 3A 동기형 스텝다운 SWIFT™ 컨버터 TPS54620 4.5V~17V, 6A 동기형 SWIFT™ 벅 컨버터
레퍼런스 디자인

TIDA-01437 — IO-Link 인터페이스를 갖춘 RGB 신호 조명 레퍼런스 디자인

This reference design implements a five-segment LED smart stack light with 20 LEDs used in factory floor and industrial process automation of greater complexity. An IO-Link interface is implemented for controlling the stack light and reading back status information. The design features low power (...)
Design guide: PDF
회로도: PDF
패키지 다운로드
VSON (DRB) 8 옵션 보기
VSSOP (DGK) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상