계산 툴
데이터시트
TPS54560B
- High efficiency at light loads with pulse skipping Eco-mode™
- 92-mΩ high-side MOSFET
- 146-µA operating quiescent current and
2-µA shutdown current - 100-kHz to 2.5-MHz Fixed switching frequency
- Synchronizes to external clock
- Low dropout at light loads with integrated BOOT recharge FET
- Adjustable UVLO and hysteresis
- 0.8 V 1% Internal voltage reference
- 8-Pin HSOIC with PowerPAD™ package
- –40°C to 150°C TJ operating range
- Create a custom design using the TPS54560B with the WEBENCH® Power Designer
The TPS54560B is a 60-V, 5-A step-down regulator with an integrated high side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces no-load-supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the EN (enable) pin is pulled low.
Undervoltage lockout is internally set at 4.3 V but can be increased using the EN pin. Output voltage start-up ramp is internally controlled to provide a controlled start-up and eliminate overshoot.
A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.
The TPS54560B is available in an 8-pin thermally enhanced HSOIC PowerPAD package.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기8 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54560B 4.5-V to 60-V Input, 5-A step-down dc/dc converter with Eco-mode™ datasheet | PDF | HTML | 2019/01/24 |
| Application note | Working with Inverting Buck-Boost Converters (Rev. B) | PDF | HTML | 2022/10/18 | |
| Application note | Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) | PDF | HTML | 2021/07/26 | |
| Application note | NRND & Differences TPS54340/360/540/560 and TPS54340B/360B/540B/560B | 2019/04/05 | ||
| Application note | Output Ripple Voltage for Buck Switching Regulator (Rev. A) | 2014/10/13 | ||
| Analog Design Journal | Accurately measuring efficiency of ultralow-IQ devices | 2014/01/22 | ||
| Application note | AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) | 2013/04/23 | ||
| Application note | AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) | 2013/04/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS54560EVM-515 — TPS54560 스텝다운 DC-DC 컨버터 평가 모듈
The Texas Instruments TPS54560EVM-515 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS54560 Step-Down DC/DC Converter. The EVM operates from a 7V to 60V input (12V nominal) and provides a 5.0V output at 5A.
사용 설명서: PDF
시뮬레이션 모델
TPS54560 TINA-TI Transient Reference Design (Rev. A)
SLVM969A.TSC (903 KB) - TINA-TI Reference Design
계산 툴
SWIFTINV-CALC — SWIFT™ Converter Inverting Buck/Boost Calculator
The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)
지원되는 제품 및 하드웨어
제품
AC/DC & DC/DC converters (integrated FET)
레퍼런스 디자인
PMP22343 — 보조 출력을 지원하는 +/-40V 인버팅 벅-부스트 레퍼런스 설계
This reference design uses the TPS54560B in an inverting buck-boost topology to generate a -40-V output from a +5-V input. An auxiliary winding generates a +40-V output with reference to the same ground. For applications needing a positive and negative voltage, the buck topology provides a (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HSOIC (DDA) | 8 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치