TPS552882-Q1
- AEC-Q100 qualified:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Wide input and output voltage range
- Wide input voltage range: 2.7 V to 36 V
- Wide output voltage range: 0.8 V to 22 V
- High efficiency over entire load range
- 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
- Avoid frequency interference and crosstalk
- Optional clock synchronization
- Programmable switching frequency from 200 kHz to 2.2 MHz
- EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
- Rich protection features
- Output overvoltage protection
- Hiccup mode for output short-circuit protection
- Thermal shutdown protection
- Programmable average inductor current limit up to 16 A
- Small solution size
- Maximum switching frequency up to 2.2 MHz
- 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
- Adjustable output voltage compensation for voltage droop over the cable
- Programmable PFM and FPWM mode at light load
- Programmable output current limit by sensing resistor
- ±1% reference voltage accuracy
- Fixed 4-ms soft-start time
- Create a custom design using the TPS552882-Q1 with the WEBENCH Power Designer
The TPS552882-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.
The TPS552882-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882-Q1 uses external resistor divider to set the output voltage with 1.2-V intenral reference voltage. The TPS552882-Q1 is capable of delivering 100 W from 12-V input voltage.
The TPS552882-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882-Q1 also provides optional spread spectrum to minimize peak EMI.
The TPS552882-Q1 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS552882-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.
The TPS552882-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS552882-Q1 36-V, 16-A Buck-boost Converter datasheet (Rev. A) | PDF | HTML | 2021/12/02 |
Application note | TPS55288 벅-부스트 컨버터를 사용하여 낮은 EMI를 달성하는 방법 | PDF | HTML | 2022/10/28 | |
Functional safety information | TPS55288x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | 2022/08/10 | |
Application note | Measuring and Understanding the Output Voltage Ripple of a Boost Converter | PDF | HTML | 2021/02/22 | |
Application note | TPS55288 Layout Guideline (Rev. B) | PDF | HTML | 2020/12/20 | |
Application brief | USB Type C Power Delivery Source with TPS65987 and TPS55288 | PDF | HTML | 2020/03/06 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS552882EVM-2MHZ — TPS552882 36V, 16A 벅-부스트 컨버터 비 I2C 평가 모듈
TPS552882EVM-400KHZ — TPS552882 400kHz 작동 주파수, 비 I2C 벅-부스트 컨버터 평가 모듈
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN-HR (RPM) | 26 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치