TPS65055

활성

4개의 낮은 입력 전압 LDO를 지원하는 2.25MHz 듀얼 스텝다운 컨버터

제품 상세 정보

Regulated outputs (#) 6 Configurability Hardware configurable Vin (min) (V) 1.5 Vin (max) (V) 6.5 Vout (min) (V) 0.8 Vout (max) (V) 3 Iout (max) (A) 0.6 Features I2C control Step-up DC/DC converter 0 Step-down DC/DC converter 2 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 4 Iq (typ) (mA) 1.25 Rating Catalog Switching frequency (max) (kHz) 2475 Operating temperature range (°C) -40 to 85 Shutdown current (ISD) (typ) (µA) 18 Switching frequency (typ) (kHz) 2250
Regulated outputs (#) 6 Configurability Hardware configurable Vin (min) (V) 1.5 Vin (max) (V) 6.5 Vout (min) (V) 0.8 Vout (max) (V) 3 Iout (max) (A) 0.6 Features I2C control Step-up DC/DC converter 0 Step-down DC/DC converter 2 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 4 Iq (typ) (mA) 1.25 Rating Catalog Switching frequency (max) (kHz) 2475 Operating temperature range (°C) -40 to 85 Shutdown current (ISD) (typ) (µA) 18 Switching frequency (typ) (kHz) 2250
VQFN (RSM) 32 16 mm² 4 x 4
  • Up to 95% Efficiency
  • Output Current for DCDC Converters 2 × 0.6 A
  • Two Selectable Fixed Output Voltages 1 V and
    1.2 V for DCDC2
  • VIN Range for DCDC Converters From 2.5 V to 6 V
  • 2.25-MHz Fixed-Frequency Operation
  • Power Save Mode at Light Load Current
  • 180° Out-of-Phase Operation
  • Output Voltage Accuracy in PWM Mode ±1%
  • Low Ripple PFM Mode
  • Total Typical 32-µA Quiescent Current for Both
    DC-DC Converters
  • 100% Duty Cycle for Lowest Dropout
  • 2 General-Purpose 400 mA High PSRR LDOs
  • 2 General-Purpose 200 mA High PSRR LDOs
  • VIN Range for LDOs From 1.5 V to 6.5 V
  • Digital Voltage Selection for the LDOs
  • I2C Compatible Interface
  • Available in a 4 mm × 4 mm 32-Pin QFN Package
  • Up to 95% Efficiency
  • Output Current for DCDC Converters 2 × 0.6 A
  • Two Selectable Fixed Output Voltages 1 V and
    1.2 V for DCDC2
  • VIN Range for DCDC Converters From 2.5 V to 6 V
  • 2.25-MHz Fixed-Frequency Operation
  • Power Save Mode at Light Load Current
  • 180° Out-of-Phase Operation
  • Output Voltage Accuracy in PWM Mode ±1%
  • Low Ripple PFM Mode
  • Total Typical 32-µA Quiescent Current for Both
    DC-DC Converters
  • 100% Duty Cycle for Lowest Dropout
  • 2 General-Purpose 400 mA High PSRR LDOs
  • 2 General-Purpose 200 mA High PSRR LDOs
  • VIN Range for LDOs From 1.5 V to 6.5 V
  • Digital Voltage Selection for the LDOs
  • I2C Compatible Interface
  • Available in a 4 mm × 4 mm 32-Pin QFN Package

The TPS65055 device is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails.

The TPS65055 provides two highly efficient, 2.25 MHz step-down converters targeted at providing the core voltage and I/O voltage in a processor-based system. Both step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents.

For low noise applications the device can be forced into fixed frequency PWM mode using the I2C compatible interface. In shutdown mode, current consumption is reduced to less than 1 µA.

The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS65055 provides an output current of up to 0.6 A on each DC-DC converter.

The TPS65055 also integrates two 400-mA LDO and two 200-mA LDO voltage regulators, which can be turned on/off using separate enable pins on each LDO. Each LDO operates with an input voltage range from 1.5 V to 6.5 V allowing them to be supplied from one of the step-down converters or directly from the main battery. Two digital input pins are used to set the output voltage of the LDOs from a set of 9 different combinations for LDO1 to LDO4. Additionally, the converters can be controlled by an I2C compatible interface.

The TPS65055 is available in a small 32-pin leadless package (4 mm × 4 mm QFN) with a 0.4-mm pitch.

The TPS65055 device is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails.

The TPS65055 provides two highly efficient, 2.25 MHz step-down converters targeted at providing the core voltage and I/O voltage in a processor-based system. Both step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents.

For low noise applications the device can be forced into fixed frequency PWM mode using the I2C compatible interface. In shutdown mode, current consumption is reduced to less than 1 µA.

The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS65055 provides an output current of up to 0.6 A on each DC-DC converter.

The TPS65055 also integrates two 400-mA LDO and two 200-mA LDO voltage regulators, which can be turned on/off using separate enable pins on each LDO. Each LDO operates with an input voltage range from 1.5 V to 6.5 V allowing them to be supplied from one of the step-down converters or directly from the main battery. Two digital input pins are used to set the output voltage of the LDOs from a set of 9 different combinations for LDO1 to LDO4. Additionally, the converters can be controlled by an I2C compatible interface.

The TPS65055 is available in a small 32-pin leadless package (4 mm × 4 mm QFN) with a 0.4-mm pitch.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4
유형 직함 날짜
* Data sheet TPS65055 2.25-MHz Dual Step-Down Converter With 4 Low-Input Voltage LDOs datasheet (Rev. A) PDF | HTML 2015/06/30
Application note Optimizing Resistor Dividers at a Comparator (Rev. B) PDF | HTML 2021/04/30
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015/08/17
Application note TPS6505x Design Guide 2015/04/10

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 모듈(EVM)용 GUI

IPG-UI IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
멀티 채널 IC(PMIC)
TPS65020 3개의 DC/DC, 3개의 LDO, I2C 인터페이스 및 동적 전압 스케일링을 지원하는 6채널 전원 관리 IC(PMIC) TPS65023 DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 전원 관리 IC(PMIC) TPS65023B DC/DC 3개, LDO 3개, I2C 인터페이스 및 DVS를 지원하는 6채널 전원 관리 IC(PMIC) TPS65055 4개의 낮은 입력 전압 LDO를 지원하는 2.25MHz 듀얼 스텝다운 컨버터 TPS65084 Braswell 프로세서용 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65086 2S 및 3S 리튬 이온 배터리 작동 장치 또는 비 배터리 장치용 구성 가능 멀티 레일 PMIC TPS650861 사용자 프로그래머블 3 컨버터, 3 컨트롤러, 4 LDO 및 3 부하 스위치 전원 관리 IC(PMIC) TPS65090 스위치 모드 충전기, DCDC 3개, LDO 2개 및 부하 스위치 7개를 갖춘 6V~7V 전원 관리 IC(PMIC) TPS65094 Apollo Lake 프로세서를 위한 프로그래머블 중간 입력 전압 범위 전원 관리 IC(PMIC) TPS65217 3 DC/DC, 4 LDO, 선형 배터리 충전기 및 백색 LED 드라이버를 지원하는 통합 전원 관리 IC(PMIC) TPS652170 DC/DC 3개, LDO 4개, 배터리 충전기 및 LED 드라이버를 지원하는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218 ARM Cortex-A8/A9 SoCs 및 FPGA용 PMIC(통합 전원 관리) TPS6521815 6개의 DC/DC 컨버터, 1개의 LDO 및 3개의 부하 스위치가 있는 사용자 프로그래머블 전원 관리 IC(PMIC) TPS65218D0 ARM® Cortex™-A8/A9 SOC 및 FPGA용 통합 전원 관리(PMIC) TPS657095 임베디드 카메라 모듈 PMIC TPS65910 6x6mm QFN 제품군, 4개의 DC/DC, 8개의 LDO 및 RTC를 지원하는 통합 전원 관리 IC(PMIC) TPS65911 DC/DC 4개, LDO 9개, RTC를 지원하는 통합 전원 관리 IC(PMIC) TPS65912 DC/DC 4개, LDO 10개, LED 출력 3개 및 32kHz RC 오실레이터를 지원하는 전원 관리 IC(PMIC) TPS659128 프로세서 전원용 PMU
하드웨어 개발
평가 보드
BOOSTXL-TPS650861 TPS650861 고객 프로그래밍 BoosterPack TPS65023BEVM-664 TPS65023B 평가 모듈 TPS65023EVM-205 TPS65023 평가 모듈 TPS650860EVM-116 TPS650860 평가 모듈 TPS65218EVM-100 TPS65218 평가 모듈
소프트웨어
평가 모듈(EVM)용 GUI
IPG-UI IPG-UI EVM GUI
패키지 다운로드
VQFN (RSM) 32 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상