전원 관리 AC/DC & DC/DC controllers (external FET)

UCC28070

활성

2상 인터리브 연속 전도 모드(CCM) PFC 컨트롤러

제품 상세 정보

Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost Rating Catalog Duty cycle (max) (%) 99
Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost Rating Catalog Duty cycle (max) (%) 99
SOIC (DW) 20 131.84 mm² 12.8 x 10.3 TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Interleaved Average Current-Mode PWM Control
    With Inherent Current Matching
  • Advanced Current Synthesizer Current Sensing
    for Superior Efficiency
  • Highly-Linear Multiplier Output With Internal
    Quantized Voltage Feed-Forward Correction for
    Near-Unity PF
  • Programmable Frequency from 30 kHz to 300 kHz
  • Programmable Maximum Duty-Cycle Clamp
  • Programmable Frequency-Dithering Rate and
    Magnitude for Enhanced EMI Reduction
    • Magnitude: 3 kHz to 30 kHz
    • Rate: Up to 30 kHz
  • External-Clock Synchronization Capability
  • Enhanced Load and Line Transient Response
    through Voltage Amplifier Output Slew-Rate
    Correction
  • Programmable Peak Current Limiting
  • Bias-Supply UVLO, Overvoltage Protection, Open-
    Loop Detection, and PFC-Enable Monitoring
  • External PFC-Disable Interface
  • Open-Circuit Protection on VSENSE and VINAC
    pins
  • Programmable Soft-Start
  • Interleaved Average Current-Mode PWM Control
    With Inherent Current Matching
  • Advanced Current Synthesizer Current Sensing
    for Superior Efficiency
  • Highly-Linear Multiplier Output With Internal
    Quantized Voltage Feed-Forward Correction for
    Near-Unity PF
  • Programmable Frequency from 30 kHz to 300 kHz
  • Programmable Maximum Duty-Cycle Clamp
  • Programmable Frequency-Dithering Rate and
    Magnitude for Enhanced EMI Reduction
    • Magnitude: 3 kHz to 30 kHz
    • Rate: Up to 30 kHz
  • External-Clock Synchronization Capability
  • Enhanced Load and Line Transient Response
    through Voltage Amplifier Output Slew-Rate
    Correction
  • Programmable Peak Current Limiting
  • Bias-Supply UVLO, Overvoltage Protection, Open-
    Loop Detection, and PFC-Enable Monitoring
  • External PFC-Disable Interface
  • Open-Circuit Protection on VSENSE and VINAC
    pins
  • Programmable Soft-Start

The UCC28070 is an advanced power factor correction (PFC) device that integrates two pulse-width modulators (PWMs) operating 180° out of phase. This interleaved PWM operation generates substantial reduction in the input and output ripple currents, allowing the conducted-EMI filtering to become easier and less expensive. A significantly improved multiplier design provides a shared current reference to two independent current amplifiers that ensures matched average-current mode control in both PWM outputs while maintaining a stable, low-distortion, sinusoidal input-line current.

The UCC28070 device contains multiple innovations including current synthesis and quantized voltage feed-forward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements.

The UCC28070 device also contains a variety of protection features including output-overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

The UCC28070 is an advanced power factor correction (PFC) device that integrates two pulse-width modulators (PWMs) operating 180° out of phase. This interleaved PWM operation generates substantial reduction in the input and output ripple currents, allowing the conducted-EMI filtering to become easier and less expensive. A significantly improved multiplier design provides a shared current reference to two independent current amplifiers that ensures matched average-current mode control in both PWM outputs while maintaining a stable, low-distortion, sinusoidal input-line current.

The UCC28070 device contains multiple innovations including current synthesis and quantized voltage feed-forward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements.

The UCC28070 device also contains a variety of protection features including output-overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
UCC28070-Q1 활성 차량용 2상 인터리브 연속 전도(CCM) 모드 PFC 컨트롤러 Automotive qualified version

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기11
유형 직함 날짜
* Data sheet UCC28070 Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. F) PDF | HTML 2016/04/18
Application note UCC2806x PCB Layout Guideline for PFC 2019/04/29
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Technical article Are you on-board? Demystifying EV charging systems PDF | HTML 2017/07/31
Technical article Is PFC possible without input voltage sensing? PDF | HTML 2016/09/14
Technical article Staying cool, efficiently PDF | HTML 2016/08/22
White paper An Interleaved PFC Preregulator for High-Power Converters 2015/04/28
More literature Design Review of a Full-Featured 350-W Offline Power Converter 2013/10/29
Application note UCC28070 300W Interleaved PFC Pre-regulator Design Review (Rev. B) 2010/07/08
Application note UCC28070 Implement Bridgeless PFC Pre-Regulator Design 2009/06/18
User guide UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) 2009/05/12

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC28070EVM — UCC28070 평가 모듈

The UCC28070 evaluation module is a 300W, two-phase interleaved, PFC pre-regulator that uses average current mode control techniques to achieve near unity power factor. The pre-regulator was designed to operate off a universal ac line input of 85V to 265V and provides a regulated 390V dc output. (...)
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

UCC28070 PSpice Average Model

SLUM098.ZIP (210 KB) - PSpice Model
시뮬레이션 모델

UCC28070 PSpice Start-up Simulation Using Average Model

SLUM097.ZIP (76 KB) - PSpice Model
시뮬레이션 모델

UCC28070 TINA-TI Spice Average Model

SLUM329.ZIP (31 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCC28070 TINA-TI Start-up Simulation Using Average Model

SLUM328.TSC (813 KB) - TINA-TI Reference Design
계산 툴

SLUC114 UCC28070 Excel Applications Design Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC & DC/DC controllers (external FET)
UCC28070 2상 인터리브 연속 전도 모드(CCM) PFC 컨트롤러 UCC28070A 확장 주파수 범위(10kHz~300kHz)를 지원하는 2상 인터리브 CCM PFC 컨트롤러
하드웨어 개발
평가 보드
UCC28070EVM UCC28070 평가 모듈
거버(Gerber) 파일

HPA225A - Gerber files for the EVM mother board

SLUC110.ZIP (227 KB)
거버(Gerber) 파일

UCC28070 Mathcad Design Tool

SLUC667.ZIP (217 KB)
레퍼런스 디자인

PMP40261 — 800W 고효율 브리지리스 PFC(역률 보정) 레퍼런스 설계

This reference design is a bridgeless PFC circuit using UCC28070 Interleaving CCM PFC controller to provide 390-V /2-A output from universal AC input. The circuit uses Average Current Mode PWM control with advanced internal current synthesizer for current sensing. This design achieves 96.57% peak (...)
Test report: PDF
회로도: PDF
패키지 다운로드
SOIC (DW) 20 옵션 보기
TSSOP (PW) 20 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상