계산 툴
데이터시트
UCC28070A
- Interleaved average current-mode PWM control with inherent current matching
- Advanced current-synthesizer current sensing for superior efficiency
- Highly-linear multiplier output with internal quantized voltage feed-forward correction for near-unity PF
- Extended range programmable frequency (10kHz to 300kHz)
- Programmable maximum duty-cycle clamp
- Programmable frequency dithering rate and magnitude for enhanced EMI reduction
- Magnitude: 3kHz to 30kHz
- Rate: Up to 30kHz
- External clock synchronization capability
- Enhanced load and line transient response through slew-rate correction of voltage amplifier output current
- Programmable peak current limiting
- Bias-supply UVLO, overvoltage protection, open‑loop detection, and PFC-enable monitoring
- External PFC-disable interface
- Open-circuit protection on VSENSE and VINAC pins
- Programmable soft-start
The UCC28070A device is an extended-frequency-range derivative of the UCC28070 device, capable of operating at low switching frequencies desired for IGBT power-switch based PFC converters in high-power applications.
The UCC28070A device is capable of operating at frequencies from 10kHz to 300kHz, thus extending the range of operation compared to the UCC28070 device whose minimum operating frequency was limited to 30kHz. All the other features and benefits of the UCC28070 device are also available in the UCC28070A device. The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted EMI filtering becomes easier and less expensive.
Like the UCC28070 device, the UCC28070A device also features multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements. All protection features in the UCC28070 device such as output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection are available in the UCC28070A device as well.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기7 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | UCC28070A Extended Frequency Range (10kHz to 300kHz), Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. B) | PDF | HTML | 2023/09/08 |
| Product overview | PFC Controller Step-by-Step Selection Guide | PDF | HTML | 2023/02/28 | |
| Application note | UCC2806x PCB Layout Guideline for PFC | 2019/04/29 | ||
| White paper | Advancing Power Supply Solutions Through the Promise of GaN | 2015/02/24 | ||
| More literature | Design Review of a Full-Featured 350-W Offline Power Converter | 2013/10/29 | ||
| Application note | UCC28070 Implement Bridgeless PFC Pre-Regulator Design | 2009/06/18 | ||
| User guide | UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) | 2009/05/12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
UCC28070EVM — UCC28070 평가 모듈
The UCC28070 evaluation module is a 300W, two-phase interleaved, PFC pre-regulator that uses average current mode control techniques to achieve near unity power factor. The pre-regulator was designed to operate off a universal ac line input of 85V to 265V and provides a regulated 390V dc output. (...)
사용 설명서: PDF
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| TSSOP (PW) | 20 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치