程式碼範例或展示
CC2510
- Radio
- High-performance RF transceiver based on the
market-leading CC2500 - Excellent receiver selectivity and blocking
performance - High sensitivity (−103 dBm at 2.4 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 1 dBm for all
supported frequencies - Frequency range: 2400 - 2483.5 MHz
- Digital RSSI / LQI support
- High-performance RF transceiver based on the
- Current Consumption
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
TX: 16 mA @ −6 dBm output power) - 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
- MCU, Memory, and Peripherals
- High performance and low power 8051 microcontroller core.
- 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
- Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
- I2S interface
- 7 – 12 bit ADC with up to eight inputs
- 128-bit AES security coprocessor
- Powerful DMA functionality
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
- General
- Wide supply voltage range (2.0V - 3.6V)
- Green package: RoHS compliant and no antimony or bromine,
6×6mm QFN 36
The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 49 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
RDCR-3P-RADIO-MOD — Radiocrafts 嵌入式無線電模組
Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
偵錯探測器
CC-DEBUGGER — 適用於射頻系統單晶片的偵錯器和程式設計工具
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
使用指南: PDF
程式碼範例或展示
SWRC117 — CC1110, CC2510 Basic Software Examples
支援產品和硬體
產品
Sub-1 GHz 無線 MCU
其它無線產品
驅動程式或資料庫
SIMPLICITI — 符合 SimpliciTI 的協定堆疊
SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.
Small RF networks (...)
Small RF networks (...)
韌體
SWRC088 — CC USB Firmware Library and Examples
支援產品和硬體
產品
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
其它無線產品
硬體開發
子卡
支援軟體
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支援產品和硬體
產品
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
開發板
開發套件
軟體
軟體程式設計工具
計算工具
驅動程式或資料庫
支援軟體
SWRC046 — SmartRF(TM) Studio 6.13.1
支援產品和硬體
產品
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
軟體
計算工具
計算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支援產品和硬體
產品
MSP430 微控制器
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
Development kit
Evaluation board
設計工具
3P-WIRELESS-MODULES — 第三方無線模組搜尋工具
The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
設計工具
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 裝置的硬體設計審核
The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple 3-step process for requesting a review as well as links to relevant technical documentation and resources (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| VQFN (RHH) | 36 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。