計算工具
TPS3700-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C6
- Functional Safety-Capable
- Wide Supply Voltage Range: 1.8 V to 18 V
- Adjustable Threshold: Down to 400 mV
- Open-Drain Outputs for Overvoltage and Undervoltage Detection
- Low Quiescent Current: 5.5 µA (typ)
- High Threshold Accuracy:
- 1% Over Temperature
- 0.25% (typ)
- Internal Hysteresis: 5.5 mV (typ)
- Available in ThinSOT23-6 and WSON Packages
The TPS3700-Q1 wide-supply window voltage detector operates over a 1.8 V to 18 V range. The device has two high-accuracy comparators with an internal 400-mV reference and two open-drain outputs rated to 18 V for overvoltage and undervoltage detection. The TPS3700-Q1 device can be used as a window voltage detector or as two independent voltage monitors; the monitored voltage can be set with the use of external resistors. For even wider input voltage capability up to 65 V, see the TPS37A-Q1 or the TPS38A-Q1 devices.
The OUTA terminal is driven low when the voltage at the INA+ terminal drops below (VIT+ – Vhys), and goes high when the voltage returns above the respective threshold (VIT+). The OUTB terminal is driven low when the voltage at the INB– terminal rises above VIT+, and goes high when the voltage drops below the respective threshold (VIT+ – Vhys). Both comparators in the TPS3700-Q1 device include built-in hysteresis for filtering to reject brief glitches, thereby ensuring stable output operation without false triggering.
The TPS3700-Q1 device is available in a Thin SOT-6 and a 1.5-mm x 1.5-mm WSON-6 package and is specified over the junction temperature range of –40°C to 125°C.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的產品不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS3700-Q1 Automotive High Voltage (18V) Window Voltage Detector With Internal Reference for Over and Undervoltage Monitoring datasheet (Rev. C) | PDF | HTML | 2021年 3月 18日 |
| Application brief | Using Voltage Supervisors in High Voltage Applications (Rev. B) | PDF | HTML | 2023年 2月 20日 | |
| Functional safety information | TPS3700-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | 2021年 2月 23日 | |
| Application note | Split Supply Positive and Negative Dual Voltage Monitoring Solution | 2019年 10月 11日 | ||
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019年 6月 28日 | ||
| Application note | Adding Reset Delay to Voltage Detectors | 2018年 10月 9日 | ||
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
| Selection guide | Automotive Supervisor and Reset IC Selection Guide | 2016年 2月 22日 | ||
| Application note | Using the TPS3700 as a Negative Rail Over- and Undervoltage Detector | 2013年 7月 16日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS3700EVM-114 — 適用於 SOT-23 封裝的 TPS3700 高電壓 (18-V) 窗型電壓偵測器評估模組
The Texas Instruments TPS3700EVM-114 evaluation module (EVM) helps designers evaluate the performance of the TPS3700 high-voltage (18 V), window comparator with overvoltage and undervoltage detection. The EVM has an IC for overvoltage and undervoltage monitoring and header connectors for easy (...)
使用指南: PDF
開發板
TPS3700EVM-202 — 適用於 WSON 封裝的 TPS3700 高電壓 (18-V) 窗型電壓偵測器評估模組
The Texas Instruments TPS3700EVM-202 evaluation module (EVM) helps you evaluate the operation and performance of the TPS3700 high-voltage window comparator. The EVM has an overvoltage and undervoltage supervisory circuit with a wide supply range, independent open-drain outputs, very-low (...)
使用指南: PDF
開發板
UCC21710QDWEVM-025 — 適用於 SiC 和 IGBT 電晶體和電源模組的驅動和保護評估板
The UCC21710QDWEVM-025 is a compact, single channel isolated gate driver board providing drive, bias voltages, protection and diagnostic needed for SiC MOSFET and Si IGBT Power Modules housed in 150 x 62 x 17 mm and 106 x 62 x 30 mm packages. This TI EVM is based on 5.7-kVrms reinforced isolation (...)
使用指南: PDF
模擬型號
TPS3700 TINA-TI Transient Reference Design (Rev. A)
SBVM242A.TSC (123 KB) - TINA-TI Reference Design
計算工具
SLVRBG6 — TPS3700-Q1 Hysteresis Calculator Using External Resistors
支援產品和硬體
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
參考設計
TIDA-01424 — 車用超音波腳踢開啟參考設計
This reference design uses ultrasonic sensing to detect a kicking motion indicating the user's desire to activate a power lift-gate, power trunk, or power sliding door on an automobile. Ultrasonic sensing allows detection of more than one object, and gives a measure of distance to each (...)
參考設計
TIDA-020030 — SiC/IGBT 隔離式閘極驅動器參考設計，具備熱二極體與感測 FET
This reference design is an IGBT or SiC isolated gate driver power stage driving a IGBT module with advanced protection features. The design consists of a single phase power stage from a traction inverter supporting high level of safety features. The IGBT module has integrated thermal diode for (...)
參考設計
TIDA-020015 — 適用於 IGBT/SiC 閘極驅動器，具有功率級的 4.5-V 至 65-V 輸入、精巧型偏壓供電參考設計
This reference design is a 4.2-W, single-channel, automotive 12-V battery input flyback bias supply for IGBT/SiC isolated gate drivers. The supply accepts a wide input range of 4.5-V to 65-V DC. The output is configurable as +15 V,–8 V or +20 V, –4 V at loads up to 180 mA for driving (...)
參考設計
TIDA-020014 — 具有 3 種 IGBT/SiC 偏壓電壓解決方案的 HEV/EV 牽引逆變器功率級參考設計
This reference design presents a traction inverter single-phase power stage with three 12-V car battery inputs, 4.2-W bias supply solutions for hybrid electric vehicle and electric vehicle (HEV/EV) systems. All bias-supply solutions accept a wide input range of 4.5 V to 42 V DC from a 12-V car (...)
參考設計
TIDA-020002 — 採用 MIPI CSI-2 視訊介面、FPD-Link III 和 POC 技術的車用 2-MP 攝影機模組參考設計
This camera module reference design addresses the need for small cameras in automotive systems by combining a 2-megapixel imager with a 4-Gbps serializer. Additionally, it provides power supplies and voltage supervision for both devices in an ultra-small form factor. This design includes a (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-23-THN (DDC) | 6 | 檢視選項 |
| WSON (DSE) | 6 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點