SBASAQ6A July   2024  – November 2024 ADS9810 , ADS9811 , ADS9813

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Switching Characteristics
    8. 5.8 Timing Diagrams
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
        1. 6.3.1.1 Input Clamp Protection Circuit
        2. 6.3.1.2 Programmable Gain Amplifier (PGA)
        3. 6.3.1.3 Wide-Common-Mode Voltage Rejection Circuit
      2. 6.3.2 ADC Transfer Function
      3. 6.3.3 ADC Sampling Clock Input
      4. 6.3.4 Synchronizing Multiple ADCs
      5. 6.3.5 Reference Voltage
      6. 6.3.6 Data Interface
        1. 6.3.6.1 Data Clock Output
        2. 6.3.6.2 ADC Output Data Randomizer
        3. 6.3.6.3 Data Averaging
        4. 6.3.6.4 Test Patterns for Data Interface
          1. 6.3.6.4.1 Fixed Pattern
          2. 6.3.6.4.2 Digital Ramp
          3. 6.3.6.4.3 Alternating Test Pattern
    4. 6.4 Device Functional Modes
      1. 6.4.1 Reset
      2. 6.4.2 Power-Down
      3. 6.4.3 Initialization Sequence
      4. 6.4.4 Normal Operation
      5. 6.4.5 Speed-Boost Mode
    5. 6.5 Programming
      1. 6.5.1 Register Write
      2. 6.5.2 Register Read
      3. 6.5.3 Multiple Devices in a Daisy-Chain Topology for SPI Configuration
        1. 6.5.3.1 Register Write With Daisy-Chain
        2. 6.5.3.2 Register Read With Daisy-Chain
  8. 7 Register Map
    1. 7.1 Register Bank 0
    2. 7.2 Register Bank 1
    3. 7.3 Register Bank 2
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Parametric Measurement Unit (PMU)
      2. 8.2.2 Design Requirements
      3. 8.2.3 Detailed Design Procedure
      4. 8.2.4 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Receiving Notification of Documentation Updates
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.4.5 Speed-Boost Mode

ADS9813 supports a speed-boost mode that allows up to 8MSPS sampling rate for a user-selected analog input channel pair. In the speed-boost mode, only the user-selected channel pair is converted while the remaining 6 analog input channels are idle. The sampling rate is equal to the sampling clock frequency. The user can select any pair combination of analog inputs from the list below:

  • CH1 and CH8
  • CH2 and CH7
  • CH3 and CH6
  • CH4 and CH5

The data output interface specifications remain the same as normal mode of operation. CH[4:1] and CH[8:5] output data is replaced, respectively, by data corresponding to the channel pair selected.

Table 6-15 shows the register operations to enable or disable the speed-boost mode.

Table 6-15 Register operations for Speed-Boost Mode
STEP # REGISTER FIELD ENABLE SPEED-BOOST DISABLE SPEED-BOOST
1 REG_BANK_SEL 2 2
2 BOOST_CFG1 3 0
3 BOOST_CFG2 1 0
4 EN_BOOST 1 0
5 SEL_CH_BOOST
  • 0 for CH1 and CH8
  • 1 for CH2 and CH7
  • 2 for CH3 and CH6
  • 3 for CH4 and CH5
 0
6 REG_BANK_SEL 16 16
7 BOOST_CFG3 1 0
8 BOOST_CFG4 1 0