SNAS736C June 2017 – April 2019 LMX2595
The choice of output buffer components is very important and can have a profound impact on the output power. Table 40 shows how to treat each pin. If using a single-ended output, a pullup is required, and the user can put a 50-Ω resistor after the capacitor.
|Inductor||Potentially higher output power, but output impedance is far from 50 Ω. Consider also using with a resistive pad.|
|Resistor||More consistent matching|
|Inductor||Varies with frequency|
|Resistor||50 Ω||Vishay FC0402E50R0BST1|
|Capacitor||Varies with frequency||ATC 520L103KT16T