SLUUD44 June   2025 UCC57142

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Power Requirements
    3. 2.3 Setup for Different UCC57142 Variants
    4. 2.4 I/O Description
    5. 2.5 Jumper Information
    6. 2.6 DBV Package Compatibility
      1. 2.6.1 UCC27511 Modification
      2. 2.6.2 UCC27517 and UC27533 Modification
        1. 2.6.2.1 UCC27518, UCC27519, UCC27536, and UCC27537 Modification
      3. 2.6.3 UCC27531 and UCC27532 Modification
      4. 2.6.4 UCC44273 Modification
  7. 3Implementation Results
    1. 3.1 Equipment Setup
      1. 3.1.1 Power Supply
      2. 3.1.2 Function Generator
      3. 3.1.3 Oscilloscope
      4. 3.1.4 Digital Multimeter (DMM)
    2. 3.2 Bench Setup
    3. 3.3 Procedure and Results
    4. 3.4 Typical Performance Waveforms
      1. 3.4.1 Normal Operation
      2. 3.4.2 Overcurrent Protection Feature
  8. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  9. 5Compliance Information
  10. 6Additional Information
    1. 6.1 Trademarks

Jumper Information

Table 2-4 Jumpers

Jumper

Name

Description

J1

EN/FLT_IN to VCC pullup

Pulls EN/FLT signal input to high by connecting to VCC

J2

IN_IN to VCC pullup

Pulls IN signal input to high by connecting to VCC

J3

Pin 7 designator

Allows pin 7 compatiblity with other UCC5713x variants

J4

Pin 8 designator

Allows pin 8 compatiblity with other UCC5713x variants