SLVAFP8 December 2023 AM625SIP , TPS65219
TPS6521902 | TPS6521908 | ||
---|---|---|---|
Use Case | Vsys | 3.3 V | 3.3 V |
VDD_CORE | 0.75 V | 0.85 V | |
Integrated Memory | LPDDR4 | LPDDR4 | |
Technical Reference Manual (TRM) | SLVUCL0 | SLVUCM0 | |
BUCK1 | Vout | 0.75 V | 0.85 V |
Bandwidth | High bandwidth | High bandwidth | |
BUCK2 | Vout | 1.8 V | 1.8 V |
Bandwidth | High bandwidth | High bandwidth | |
BUCK3 | Vout | 1.1 V | 1.1 V |
Bandwidth | High bandwidth | High bandwidth | |
LDO1 | Vout | 3.3 V/1.8 V (Bypass) | 3.3 V/1.8 V (Bypass) |
LDO2 | Vout | 0.85 V | 1.2 V (Disabled) |
LDO3 | Vout | 1.8 V | 1.8 V |
LDO4 | Vout | 2.5 V | 2.5 V |
GPIOs | GPO1 | Disabled | Disabled |
GPO2 | Enabled | Enabled | |
GPIO | Disabled | Disabled | |
MODE/RESET | Config | Warm Reset | Warm Reset |
Polarity | High= Normal operation Low=Warm Reset |
High= Normal operation Low=Warm Reset |
|
MODE/SBY | Config | Mode and Standby | Mode and Standby |
Polarity | High=Active State & Forced-PWM Low=Stby State & Auto-PFM |
High=Active State & Forced-PWM Low=Stby State & Auto-PFM |
|
VSEL_SD/DDR | Config | SD | SD |
Rail | LDO1 | LDO1 | |
Polarity | High = LDO1_VSET Low = 1.8 V |
High = LDO1_VSET Low = 1.8 V |
|
EN/PB/VSENSE pin config | Push-button | Enable | |
First Supply detection [1] | Enabled | Enabled |