SBAU338B October   2019  – September 2025

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1EVM Overview
    1. 1.1 Caution and Warnings
    2. 1.2 Introduction
    3. 1.3 Kit Contents
    4. 1.4 Specifications
    5. 1.5 Device Information
  6. 2Hardware
    1. 2.1 Recommended Test Environment
    2. 2.2 Required Hardware
    3. 2.3 Hardware Setup
      1. 2.3.1 AFE79xx EVM and TSW14J58 EVM Connections
      2. 2.3.2 Power Supply Setup
  7. 3Software
    1. 3.1 Required Software
      1. 3.1.1 Software Installation Sequence
    2. 3.2 Latte Overview
      1. 3.2.1 Latte User Interface
      2. 3.2.2 Useful Latte Short-Cuts
  8. 4Implementation Results
    1. 4.1 AFE79xxEVM Configuration
      1. 4.1.1 Connect Latte to Board
      2. 4.1.2 Compile Libraries
      3. 4.1.3 Program AFE79xx EVM
      4. 4.1.4 TXDAC Evaluation
      5. 4.1.5 RXADC and FBADC Evaluation
    2. 4.2 AFE79xxEVM Configuration Modifications
      1. 4.2.1 Data Converter Clocks Settings
      2. 4.2.2 Data Rate and JESD Parameters
      3. 4.2.3 Steps to Modify NCO
      4. 4.2.4 Steps to Modify DSA
  9. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  10. 6Additional Information
    1. 6.1 Status Check and Troubleshooting Guidelines
      1. 6.1.1 AFE79xx EVM Status Indicators
      2. 6.1.2 TSW14J58EVM Status Indicators
    2.     Trademarks
  11. 7Revision History

Compile Libraries

In this step, the library of scripts packaged with the Latte UI is compiled and takes approximately 30 seconds to run.

  1. In the scripts window, select devInit.py.
  2. Select F5 to run the program.
  3. Check the Log window for status and errors.
    AFE7900EVM AFE7920EVM TSW14J58EVM Latte Log After Successful devInit.pyFigure 4-2 Latte Log After Successful devInit.py