SBAU430 April   2025 DAC39RF12

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents (Required Equipment)
  6. 2Hardware
    1. 2.1 Setup Procedure
      1. 2.1.1  Installing the DAC39RF12EVM Configuration GUI Software
        1. 2.1.1.1 Installing & Setting Up Vivado Lab Tools
      2. 2.1.2  Connect the DAC39RF12EVM and TSW14J59EVM
      3. 2.1.3  Connect the Power Supplies to the Boards (Power Off)
      4. 2.1.4  Connect the Spectrum Analyzer to the EVM
      5. 2.1.5  Turn On the TSW14J59EVM Power and Connect to the PC
      6. 2.1.6  Turn On the DAC39RF12EVM Power Supplies and Connect to the PC
      7. 2.1.7  Turn On the Signal Generators
      8. 2.1.8  Launching the DAC39RF12EVM GUI and Programing the DAC EVM - JMODE 0
      9. 2.1.9  Launching the DAC39RF12EVM GUI and Programing the DAC EVM - JMODE 1
      10. 2.1.10 Launching the DAC39RF12EVM GUI and Programing the DAC EVM - JMODE 3
    2. 2.2 Evaluation Board Details: Analog Outputs
    3. 2.3 FMC Signal Routing
  7. 3References
    1. 3.1 Trademarks

2.1.1.1 Installing & Setting Up Vivado Lab Tools

For the DAC39RF12EVM, Vivado Lab Tools will need to be installed. Please follow the steps outlined in this section.

  1. Create a User account for AMD and sign in.

    1. Fill out the appropriate information before downloading.

    2. When complete, press the download button.

  2. The download file type will be a .tar file. In Windows you can open the .tar file and explore it.

  3. Next, look inside the Vivado_Lab_Win_2024.2_1113_1001 folder for <xsetup.exe>

    1. Right click and execute it, windows will ask you to “Extract All”.

  4. Once the files are extracted, open the folder and find “xsetup.exe”.

    1. Right click on this file and install it. Windows may ask for permissions.

  5. Follow the sequence of steps in the figures outlined below in order to finis the Xilinx Lab Tools installation.

DAC39RF12EVM
DAC39RF12EVM Installing Vivado Lab ToolsFigure 2-2 Installing Vivado Lab Tools
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM Adding Vivado Lab Tools to the Windows PATHFigure 2-3 Adding Vivado Lab Tools to the Windows PATH
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
DAC39RF12EVM
Once this is complete, the J59_Server can be run.