SBOU323 June   2025 XTR200

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Evaluation Setup
    2. 2.2 Jumper Information
    3. 2.3 Output Mode Configuration
      1. 2.3.1 Current Mode Configuration
      2. 2.3.2 Voltage Mode Configuration
    4. 2.4 SET Pin
    5. 2.5 Error Flag
    6. 2.6 Power Requirements
    7. 2.7 Optional External Transistor
    8. 2.8 Optional External Protection Circuitry
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Trademarks
  10. 5Related Documentation
    1. 5.1 Supplemental Content

2.2 Jumper Information

Table 2-1 shows the configuration for the jumper settings.

Table 2-1 Jumper Settings

Jumper

Function

Default Position

Description

JP1

Mode Selection

Closed

Closed: Voltage Mode

Open: Current Mode

JP2

Output Control

Closed

Closed: Output enabled

Open: Output disabled

JP3

LDO_VSP

Closed

Closed: VSP does power the 3.3V LDO (U1)

Open: VSP does not power the 3.3V LDO (U1)