The serial peripheral interface (SPI) peripherals
function support the following key features:
- Support ULPCLK/2 bit rate and
up to 16Mbits/s in both controller and
peripheral mode
- Configurable as a controller
or a peripheral
- Supports single parity for
transmit and receive
- Programmable clock prescaler
and bit rate
- Programmable data frame size
from 4 bits to 16 bits (controller mode) and 7 bits to 16 bit (peripheral
mode)
- Transmit and receive FIFOs (4
entries each with 16 bits per entry) supporting DMA data transfer
- Supports TI mode and Motorola
mode
- Support single bit parity in
both transmit and receive paths
- See Table 8-16
for detailed information on supported features
Table 8-16 SPI (UNICOMM)
Features
| Supported Features |
UC4.SPI, UC8.SPI |
| Controller and Peripheral mode |
Yes |
| Supports Parity function |
Yes |
| Supports Repeat mode transfer |
- |
| Supports Receive timeout |
- |
| Supports Command/Data control |
- |
| Supports 4 chip selects |
- |
For more details, see the SPI (UNICOMM) chapter of the
MSPM0 L-Series Technical Reference Manual.