SLLSF93A June   2019  – January 2025 TUSB8042A

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Variants
    1. 4.1 Device Version Comparison
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Timing Diagrams
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Battery Charging Features
      2. 7.3.2 USB Power Management
      3. 7.3.3 One-Time Programmable (OTP) Configuration
      4. 7.3.4 Clock Generation
      5. 7.3.5 Crystal Requirements
      6. 7.3.6 Input Clock Requirements
      7. 7.3.7 Power-Up and Reset
    4. 7.4 Device Functional Modes
      1. 7.4.1 External Configuration Interface
      2. 7.4.2 I2C EEPROM Operation
      3. 7.4.3 Port Configuration
      4. 7.4.4 SMBus Target Operation
  9. 8 Register Maps
    1. 8.1  Configuration Registers
    2. 8.2  ROM Signature Register
    3. 8.3  Vendor ID LSB Register
    4. 8.4  Vendor ID MSB Register
    5. 8.5  Product ID LSB Register
    6. 8.6  Product ID MSB Register
    7. 8.7  Device Configuration Register
    8. 8.8  Battery Charging Support Register
    9. 8.9  Device Removable Configuration Register
    10. 8.10 Port Used Configuration Register
    11. 8.11 Device Configuration Register 2
    12. 8.12 USB 2.0 Port Polarity Control Register
    13. 8.13 UUID Registers
    14. 8.14 Language ID LSB Register
    15. 8.15 Language ID MSB Register
    16. 8.16 Serial Number String Length Register
    17. 8.17 Manufacturer String Length Register
    18. 8.18 Product String Length Register
    19. 8.19 Device Configuration Register 3
    20. 8.20 USB 2.0 Only Port Register
    21. 8.21 Serial Number String Registers
    22. 8.22 Manufacturer String Registers
    23. 8.23 Product String Registers
    24. 8.24 Additional Feature Configuration Register
    25. 8.25 SMBus Device Status and Command Register
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Discrete USB Hub Product
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Upstream Port Implementation
          2. 9.2.1.2.2 Downstream Port 1 Implementation
          3. 9.2.1.2.3 Downstream Port 2 Implementation
          4. 9.2.1.2.4 Downstream Port 3 Implementation
          5. 9.2.1.2.5 Downstream Port 4 Implementation
          6. 9.2.1.2.6 VBUS Power Switch Implementation
          7. 9.2.1.2.7 Clock, Reset, and Misc
          8. 9.2.1.2.8 TUSB8042A Power Implementation
        3. 9.2.1.3 Application Curves
    3. 9.3 Power Supply Recommendations
      1. 9.3.1 TUSB8042A Power Supply
      2. 9.3.2 Downstream Port Power
      3. 9.3.3 Ground
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
        1. 9.4.1.1 Placement
        2. 9.4.1.2 Package Specific
        3. 9.4.1.3 Differential Pairs
      2. 9.4.2 Layout Examples
        1. 9.4.2.1 Upstream Port
        2. 9.4.2.2 Downstream Port
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

8.11 Device Configuration Register 2

Figure 8-10 Register Offset Ah
Bit No.76543210
Reset State00X00000
Table 8-11 Bit Descriptions – Device Configuration Register 2
BitFieldTypeDescription
7ReservedROReserved. Read-only, returns 0 when read.
6customBCfeaturesRWCustom Battery Charging Feature Enable. This bit controls the ability to write to the battery charging feature configuration controls.
0 = The HiCurAcpModeEn is read only and the values are loaded from the OTP ROM.
1 = The HiCurAcpModeEn bit is read/write and can be loaded by EEPROM or written by SMBus.
This bit can be written simultaneously with HiCurAcpModeEn.
5pwrctlPolRWPower enable polarity. This bit is loaded at the deassertion of reset with the value of the PWRCTL_POL pin.
0 = PWRCTL polarity is active low
1 = PWRCTL polarity is active high
When the TUSB8042A is in I2C mode, the TUSB8042A loads this bit from the contents of the EEPROM.
When the TUSB8042A is in SMBUS mode, the value can be overwritten by an SMBus host.
4HiCurAcpModeEnRO/RWHigh-current ACP mode enable. This bit enables the high-current tablet charging mode when the automatic battery charging mode is enabled for downstream ports.
0 = High current divider mode disabled . High current is ACP2(default)
1 = High current divider mode enabled. High current mode is ACP3
This bit is read only unless the customBCfeatures bit is set to 1. If customBCfeatures is 0, the value of this bit reflects the value of the OTP ROM HiCurAcpModeEn bit.
3:2ReservedRWReserved. These registers are unused and returns whatever value was written.
1autoModeEnzRWAutomatic Mode Enable. This bit is loaded at the deassertion of reset with the value of the AUTOENz/HS_SUSPEND pin.
The automatic mode only applies to downstream ports with battery charging enabled when the upstream port is not connected. Under these conditions:
0 = Automatic mode battery charging features are enabled.
1 = Automatic mode is disabled; only Battery Charging DCP and CDP mode is supported.
NOTE: When the upstream port is connected, Battery Charging CDP mode is supported on all ports that are enabled for battery charging support regardless of the value of this bit.
0RSVDROReserved. Read only, returns 0 when read.