The integrated isolated DC-DC converter uses advanced circuit and on-chip layout techniques to reduce radiated emissions and achieve up to 47% typical efficiency. The integrated transformer uses thin film polymer as the insulation barrier. In case bus communication is not needed, the DC-DC converter can be switched off using EN pin to save power. The output voltage, V_ISOOUT, is monitored and feedback information is conveyed to the primary side through a dedicated isolation channel. The duty cycle of the primary switching stage is adjusted accordingly. The fast feedback control loop of the power converter verifies low overshoots and undershoots during load transients. Undervoltage lockout (UVLO) with hysteresis is integrated on the V_IO, V_DD and V_ISOOUT supplies which provides robust fails-safe system performance under noisy conditions. An integrated soft-start mechanism provides controlled inrush current and avoids any overshoot on the output during power up.