at VO = 2VPP,
RF = 1kΩ, RL = 1kΩ, and TA ≅ 25°C (unless
otherwise noted)
| Simulated with no output
load |
Figure 6-27 Large-Signal Response vs Supply Voltage
Figure 6-29 Harmonic Distortion vs Frequency vs Supply Voltage
Figure 6-31 Small-Signal Frequency Response vs CL
| Measured then fit to 1/f
model |
Figure 6-33 Auxiliary Input Stage Voltage Noise Density vs Frequency
Figure 6-35 Common-Mode Rejection Ratio vs Frequency
| Simulated curves,
VS = 24V |
| Abs (VIN,Diff
(max)) = VS when VS <
7V |
Figure 6-39 Input
Bias Current vs Differential Input Voltage
Figure 6-41 Input
Offset Voltage vs Ambient Temperature
| 27000 units, µ = 16µV, σ = 63µV, VS =
24V |
Figure 6-43 Input
Offset Voltage Distribution
Figure 6-26 Large-Signal Response vs Supply Voltage
Figure 6-28 Harmonic Distortion vs Frequency vs Supply Voltage
Figure 6-30 Small-Signal Frequency Response vs CL
| Measured then fit to 1/f
model |
| |
Figure 6-34 Open-Loop Output Impedance vs Frequency
Figure 6-36 Power
Supply Rejection Ratio vs Frequency
Figure 6-38 Input
Bias Current vs Input Common-Mode Voltage
Figure 6-40 Quiescent Current vs Ambient Temperature
| 27000 units, µ = 3.82mA, σ = 17µA, VS =
24V |
Figure 6-42 Quiescent Current Distribution
| –40°C to +125°C fit, 32
units, µ = –0.15µV/°C, σ = 2.5µV/°C |
Figure 6-44 Input
Offset Voltage Drift Distribution