SLUS720F February 2007 – June 2019 TPS40195
PRODUCTION DATA.
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |||
---|---|---|---|---|---|---|---|---|
INPUT | ||||||||
VIN | Input voltage | 10.8 | 12.0 | 13.2 | V | |||
IIN | Input current | VIN = 12 V, IOUT= 10 A | 1.7 | 1.8 | A | |||
No load, VIN = 12 V, IOUT= 0 A | 5 | mA | ||||||
VIN_ UVLO_OFF | Undervoltage lockout turn off threshold | 0 A ≤ IOUT ≤ 10 A | 5.4 | 6.0 | 6.6 | V | ||
VIN_UVLO_ON | Undervoltage lockout turn on threshold | 0 A ≤ IOUT ≤ 10 A | 6.6 | 7.0 | 7.6 | |||
OUTPUT | ||||||||
VOUT | Input voltage range | VIN = 12 V, IOUT= 5 | 1.75 | 1.80 | 1.85 | V | ||
Line regulation | 10.8 ≤ VIN ≤ 13.2 V | 0.5% | ||||||
Load regulation | 0 A ≤ IOUT ≤ 10 A | 0.5% | ||||||
VOUT(ripple) | Output voltage ripple | VIN = 12 V, IOUT= 10 A | 100 | mVP-P | ||||
IOUT | Output current | 10.8 ≤ VIN ≤ 13.2 V | 0 | 5 | 10 | A | ||
IOCP | Output overcurrent inception point | VIN = 12 V, VOUT= (VOUT- 5) | 14 | 20 | 43 | |||
ΔI | Transient response load step | 10 A ≤ IOUT(max) ≤ 0.2 × ( IOUT(max) ) | 8 | A | ||||
Transient response load slew rate | 5 | A/μs | ||||||
Transient response overshoot | 200 | mV | ||||||
Transient response settling time | 1 | ms | ||||||
SYSTEM | ||||||||
fSW | Switching frequency | 240 | 300 | 360 | kHz | |||
ηPK | Peak efficiency | VIN = 12 V, 0 A ≤ IOUT ≤ 10 A | 90% | |||||
η | Efficiency at full load | VIN = 12 V, IOUT = 10 A | 87% | |||||
TOP | Operating temperature range | 10.8 ≤ VIN ≤ 13.2 V, 0 A ≤ IOUT ≤ 10 A | -40 | 25 | 85 | °C | ||
MECHANICAL | ||||||||
W | Width | 1.6 | in | |||||
L | Length | 3.5 | ||||||
h | Height | 0.26 |