SLUSG21C May 2025 – August 2026 UCC25661
PRODUCTION DATA
Before determining the resonant tank component parameters, select a nominal switching frequency (resonant frequency). In this design, 100kHz is selected as the resonant frequency.
Calculate the resonant tank parameters using Equation 16, Equation 17, and Equation 18.
After selecting the preliminary parameters, find the closest actual component value that is available, and reassess the gain curve with the selected parameters, and then run time domain simulation to verify the circuit operation.
The following resonant tank parameters are:
Based on the final resonant tank parameters, calculate the resonant frequency:
Based on the new LLC gain curve, the normalized switching frequency at maximum and minimum gain calculated using:
The maximum and minimum switching frequencies are: