SLUSG21C May 2025 – August 2026 UCC25661
PRODUCTION DATA
In UCC256614, the TSET pin can be used as PFC on/off logic. After the initial programming phase, TSET becomes a logic output pin expected to drive a small signal MOSFET (2N7002 for example). When UCC256614 operates in LF Burst mode, the PFC on/off signal goes high. TSET pin voltage goes low when the controller exits LF Burst mode. This can be used either turn-off the PFC or adjusting the burst mode threshold on the PFC controller to enable a low standby power mode.