SLVT227 October   2025

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6.   6
  7. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Safety Considerations
    5. 1.5 Dimensions
    6. 1.6 Test Setup
  8. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Thermal Images
    4. 2.4 Bode Plots
    5. 2.5 EMI
  9. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Output Voltage Ripple
    3. 3.3 Load Transients
    4. 3.4 Start-up Sequence
    5. 3.5 Shut-down Sequence
  10. 4Static Regulation
  11. 5Transformer Details
    1. 5.1 Material List
    2. 5.2 Winding Details
    3. 5.3 Schematic
    4. 5.4 Winding Instructions
    5. 5.5 Details about Core and Air Gap and Bobbin
    6. 5.6 Bobbin Mechanical Details
  12.   Trademarks

3.3 Load Transients

Load transient response is shown in Figure 3-9. C4: output voltage, AC coupled, C3: output current, DC coupled, 20MHz bandwidth limit for both waveforms.

PMP31375 Load Transient at 230VAC, Output Current Switched between 1A and 2A Figure 3-9 Load Transient at 230VAC, Output Current Switched between 1A and 2A