SLVT230 November   2025

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6.   6
  7. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Safety Considerations
    5. 1.5 Dimensions
    6. 1.6 Test Setup
  8. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Thermal Images
    4. 2.4 Bode Plots
  9. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Output Voltage Ripple
    3. 3.3 Load Transients
    4. 3.4 Start-Up Sequence
    5. 3.5 Shut-down Sequence
  10. 4Static Regulation
  11. 5Transformer Details
    1. 5.1 Material List
    2. 5.2 Winding Details
    3. 5.3 Schematic
    4. 5.4 Winding Instructions
    5. 5.5 Details about Core, Air Gap and Bobbin
    6. 5.6 Bobbin Mechanical Details
  12.   Trademarks

5.2 Winding Details

Table 5-1 Winding Table
Winding Start Pin Finish Pin Direction Turns Wire Size / Type
Np1 3 2 CW 12 0.3mm, ECW, 4 wires in parallel
Na 4 5 CW 9 0.2mm, ECW, single wire
Ns1 11 9 CW 6 0.4mm, ECW, 5 wires in parallel
Ns2 10 8 CW 6 0.4mm, ECW, 5 wires in parallel
Np2 2 1 CW 12 0.3mm, ECW, 4 wires in parallel