SLVT248 May   2026  – May 2026

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Functional Block Diagram
    3. 1.3 Pin Functions
    4. 1.4 Required Equipment
    5. 1.5 Dimensions
    6. 1.6 Test Setup
  7. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Voltage Regulation
    4. 2.4 Thermal Images
  8. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Output Voltage Ripple
    3. 3.3 Short-Circuit Protection
    4. 3.4 Load Transients
    5. 3.5 Start-Up and Shutdown Sequence
    6. 3.6 Brown In and Brown Out
  9.   Trademarks

3.6 Brown In and Brown Out

Dynamic response is shown in Figure 3-20 and Figure 3-21.

CH1: VOUT1_12V, CH2: VOUT2_24V , CH3: VOUT3_18V, CH4: VINDC

PMP41184 DC Brown In at 113VFigure 3-20 DC Brown In at 113V
PMP41184 DC Brown Out at 99VFigure 3-21 DC Brown Out at 99V