SLVUCP4A November   2023  – August 2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Push Buttons
    5. 2.5 Debug Information
    6. 2.6 Test Points
    7. 2.7 Configuring the TPS25730EVM
      1. 2.7.1 Minimum Voltage Configuration
      2. 2.7.2 Maximum Voltage Configuration
      3. 2.7.3 Sink Current Configuration
      4. 2.7.4 Complete Example
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Trademarks
  10. 5Revision History

3.2 PCB Layouts

Figure 3-1 through Figure 3-6 illustrate the EVM PCB layouts.

TPS25730EVM TPS25730EVM Top Composite View Figure 3-1 TPS25730EVM Top Composite View
TPS25730EVM TPS25730EVM Top Layer Figure 3-2 TPS25730EVM Top Layer
TPS25730EVM TPS25730EVM Ground Plane Figure 3-3 TPS25730EVM Ground Plane
TPS25730EVM TPS25730EVM Power Layer Figure 3-4 TPS25730EVM Power Layer
TPS25730EVM TPS25730 Bottom Layer Figure 3-5 TPS25730 Bottom Layer
TPS25730EVM TPS25730 Bottom Composite View Figure 3-6 TPS25730 Bottom Composite View