SWRS152O June 2013 – January 2026 WL1801MOD , WL1805MOD , WL1831MOD , WL1835MOD
PRODUCTION DATA
Figure 9-2 shows the location of the antenna on the WL1835MODCOM8B board as well as the RF trace routing from the WL1835 module (TI reference design). The Pulse multilayer antennas are mounted on the board with a specific layout and matching circuit for the radiation test conducted in FCC, CE, and IC certifications.
For the reuse of the regulatory certification, a trace of 1-dB attenuation is required on the final application board.
Figure 9-2 Location of Antenna and RF Trace Routing on the WL1835MODCOM8B BoardFollow these RF trace routing recommendations: