Top

Product details

Parameters

Features LCD, Real-Time Clock, DAC Non-volatile memory (kB) 384 RAM (KB) 34 ADC 12-bit SAR ADC: channels (#) 12 GPIO pins (#) 74 I2C 3 SPI 6 UART 3 Comparator channels (#) 12 Approx. price (US$) 5.30 | 1ku Timers - 16-bit 4 Bootloader (BSL) UART Special I/O Operating temperature range (C) -40 to 85 Rating Catalog open-in-new Find other MSP430 ultra-low-power MCUs

Package | Pins | Size

LQFP (PZ) 100 256 mm² 16 x 16 open-in-new Find other MSP430 ultra-low-power MCUs

Features

  • Low Supply Voltage Range:
    3.6 V Down to 1.8 V
  • Ultra-Low-Power Consumption
    • Active Mode (AM):
      All System Clocks Active:
      295 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical)
    • Standby Mode (LPM3):
      Watchdog With Crystal, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
      2.0 µA at 2.2 V, 2.2 µA at 3.0 V (Typical)
    • Shutdown, Real-Time Clock (RTC) Mode (LPM3.5):
      Shutdown Mode, Active RTC With Crystal:
      1.1 µA at 3.0 V (Typical)
    • Shutdown Mode (LPM4.5):
      0.45 µA at 3.0 V (Typical)
  • Wake up From Standby Mode in 3 µs (Typical)
  • 16-Bit RISC Architecture, Extended Memory, up to 20-MHz System Clock
  • Flexible Power-Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals up to 32 MHz (XT2)
  • Four 16-Bit Timers With 3, 5, or 7 Capture/Compare Registers
  • Three Universal Serial Communication Interfaces (USCIs)
    • USCI_A0, USCI_A1, and USCI_A2 Each Support:
      • Enhanced UART With Automatic Baud-Rate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0, USCI_B1, and USCI_B2 Each Support:
      • I2C
      • Synchronous SPI
  • Full-Speed Universal Serial Bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB Power System
    • Integrated USB-PLL
    • Eight Input and Eight Output Endpoints
  • 12-Bit Analog-to-Digital Converter (ADC) With Internal Shared Reference, Sample-and-Hold, and Autoscan Feature
  • Two 12-Bit Digital-to-Analog Converters (DACs) With Synchronization
  • Voltage Comparator
  • Integrated LCD Driver With Contrast Control for up to 160 Segments
  • Hardware Multiplier Supports 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Six-Channel Internal DMA
  • RTC Module With Supply Voltage Backup Switch
  • Device Comparison Summarizes the Available Family Members

All trademarks are the property of their respective owners.

open-in-new Find other MSP430 ultra-low-power MCUs

Description

The TI MSP family of ultra-low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in 3 µs (typical).

The MSP430F665x and MSP430F565x series are microcontroller configurations with four 16-bit timers, a high-performance 12-bit ADC, three USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, a comparator, USB 2.0, and up to 74 I/O pins.

The MSP430F645x and MSP430F535x series are microcontroller configurations with an integrated 3.3-V LDO, four 16-bit timers, a high-performance 12-bit ADC, three USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, a comparator, and up to 74 I/O pins.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.

open-in-new Find other MSP430 ultra-low-power MCUs
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 15
Type Title Date
* Datasheet MSP430F665x, MSP430F645x, MSP430F565x, MSP430F535x Mixed-Signal Microcontrollers datasheet (Rev. D) Sep. 26, 2018
* Errata MSP430F6458 Device Erratasheet (Rev. Z) Apr. 24, 2019
* User guides MSP430x5xx and MSP430x6xx Family User's Guide (Rev. Q) Aug. 17, 2018
Application notes MSP430 System-Level ESD Considerations (Rev. A) Jan. 13, 2020
Application notes MSP430 System ESD Troubleshooting Guide Dec. 13, 2019
Application notes ESD Diode Current Specification (Rev. A) Jul. 10, 2019
Application notes General Oversampling of MSP ADCs for Higher Resolution (Rev. A) Apr. 01, 2016
Technical articles Don’t miss out on the top training videos of 2015 Dec. 16, 2015
Application notes MSP Code Protection Features Dec. 07, 2015
Application notes Designing With MSP430™ MCUs and Segment LCDs (Rev. A) Jul. 20, 2015
Technical articles How fast is your 32-bit MCU? Jul. 15, 2015
Application notes Using the MSP430 RTC_B Module With Battery Backup Supply (Rev. B) Jun. 04, 2015
Technical articles Lose power, not data with new FRAM microcontrollers May 20, 2015
Technical articles Easily increase functionality in motor drive applications May 19, 2015
Application notes MSP430 Embedded Application Binary Interface May 16, 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

DEVELOPMENT KITS Download
document-generic User guide
$12.99
Description

To get started developing:
Step 1: Buy Launchpad
Step 2: Download User Guide
Step 3: Get to know MSP430 through our MSP430 Workshop Series

Develop low power, PC-connected applications with integrated Full-speed USB 2.0 (HID/MSC/CDC).  The MSP-EXP430F5529LP LaunchPad is an inexpensive, simple (...)

Features
  • USB 2.0-enabled MSP430F5529 16-bit MCU
  • Up to 25 MHz
  • 128KB Flash and 8KB RAM
  • 12 Bit SAR ADC
  • Various USB device class examples and embedded software libraries available (CDC, HID, MSC)
  • eZ-FET lite: Open source onboard debugger with application UART
  • One USB connection for emulator and target via the use of (...)
DEVELOPMENT KITS Download
document-generic User guide
$89.00
Description

The MSP-TS430PZ100C is a standalone 100-pin ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430PZ100C development board supports MSP430F643x, MSP430F645x, MSP430F533x and (...)

Features

 

  • Development board (MSP-TS430PZ100C) with a 100-pin ZIF socket fitting MSP430 derivatives in 100-pin QFP (PZ) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the MSP-FET430UIF.

 

Software development

SOFTWARE DEVELOPMENT KITS (SDK) Download
MSP430Ware for MSP Microcontrollers
MSPWARE MSP430Ware is a collection of resources that help users to effectively create and build MSP430 code. These resources support ALL MSP430 microcontrollers (MCUs). As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”

This complete collection of (...)

Features
  • Collection of MSP design resources
  • Available within CCS, as a standalone executable, or as part of TI’s new Cloud-based tools
  • Auto-updates through the web
  • Sleek & intuitive GUI for browsing content
  • Features the MSP Driver Library
  • Automatic filtering of content using a unique 2-pane view
APPLICATION SOFTWARE & FRAMEWORKS Download
MSP430 USB Developers Package
MSP430USBDEVPACK Note: This software is available as part of MSPWare. If you have downloaded and installed the latest version of MSPWare, then you already have this USB software development package.

The USB Developers Package for MSP430 is a software package containing all necessary source code and sample (...)

Features
  • MSP430 API Code Stacks - Contains all necessary API's and examples to get started with USB development, using the CDC (Communications Device Class), HID (Human Interface Device) and MSC (Mass Storage Class) classes. The USB API also supports composite devices where a single physical device contains (...)
DRIVERS & LIBRARIES Download
Digital Signal Processing (DSP) Library for MSP430 Microcontrollers
MSP-DSPLIB — The Texas Instruments MSP430™ Digital Signal Processing library is a set of highly optimized functions to perform many common signal processing operations on fixed-point numbers for MSP430 microcontrollers. This function set is typically used in applications where processing-intensive (...)
DRIVERS & LIBRARIES Download
MSP Graphics Library
MSP-GRLIB The MSP Graphics Library is a royalty-free set of graphics primitives for creating graphical user interfaces on MSP430 and MSP432 microcontroller-based boards that have a graphical display. The graphical library consists of two building layers of functionality: the display driver layer, specific to (...)
Features
  • Free license and royalty-free use
  • Simplify and accelerate developmen tof applications
  • Easy-to-maintain code
DRIVERS & LIBRARIES Download
Fixed Point Math Library for MSP
MSP-IQMATHLIB The Texas Instruments® MSP IQmath and Qmath Libraries are a collection of highly optimized and high-precision mathematical functions for C programmers to seamlessly port a floating-point algorithm into fixed-point code on MSP430 and MSP432 devices. These routines are typically used in (...)
Features
  • Optimized fixed point functions - reduce development time and enable developers to focus on optimizing application code
  • Up to 100x higher performance when executing common fixed point scalar math functions in CCS – this means the MSP microcontroller can remain in low power modes longer than (...)
DRIVERS & LIBRARIES Download
Bootloader (BSL) for MSP low-power microcontrollers
MSPBSL Below are the steps needed in order to both understand and use the MSPBSL effectively across the MSP portfolio. For the most up to date information on what features the BSL on your device supports or which interface methods are needed to communicate with the BSL, please see “TABLE 1. Overview (...)
DRIVERS & LIBRARIES Download
MSP Driver Library
MSPDRIVERLIB Driver Library's abstracted API keeps you above the bits and bytes of the MSP430 and MSP432 hardware by providing easy-to-use function calls. Thorough documentation is delivered through a helpful API Guide, which includes details on each function call and the recognized parameters. Developers can (...)
Features
  • Software APIs that abstract away the details of the device’s hardware registers
  • Licensed BSD
  • Examples showing how to use DriverLib APIs in your project
  • Complete API guide available in PDF and html formats
  • Integration with CCS and TI Resource Explorer when using MSPWare
DRIVERS & LIBRARIES Download
Floating Point Math Library for MSP430
MSPMATHLIB Continuing to innovate in the low power and low cost microcontroller space, TI brings you MSPMATHLIB. Leveraging the intelligent peripherals of our devices, this floating point math library of scalar functions brings you up to 26x better performance.

Mathlib is easy to integrate into your designs. (...)

Features
  • Up to 26x higher performance when executing floating point scalar math functions
  • Remains in low power modes longer due to the increased performance
  • Free and easy to use –  now integrated in CCS and IAR
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio™ Integrated Development Environment for MSP Microcontrollers
CCSTUDIO-MSP

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
EnergyTrace Technology
ENERGYTRACE EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult to (...)

Features
  • Current measurement is enabled for all MSP430 MCUs, MSP432 MCUs and connectivity devices
  • Tracing of CPU states is available on selected MSP430 MCUs, MSP432 MCUs, CC13x2 wireless MCUs and CC26x2 wireless MCUs 
  • Tracing of peripheral states is also available on selected MSP430 MCUs, CC13x2 (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
GCC - Open Source Compiler for MSP Microcontrollers
MSP430-GCC-OPENSOURCE MSP430™ and MSP432™ GCC open source packages are complete debugger and open source C/C++ compiler toolchains for building and debugging embedded applications based on MSP430 and MSP432 microcontrollers. These free GCC compilers support all MSP430 and MSP432 devices without code size limitations. In (...)
Features
  • Available standalone or integrated within Code Composer Studio™
  • No Code Size Limitation
  • Free and Open-source
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
ULP (Ultra-Low Power) Advisor
ULPADVISOR ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Features
  • Seamless tool that provides easy-to-understand remarks for creating power-efficient code for all MSP devices
  • Checks your code against a thorough ULP checklist
  • Built in to Code Composer Studio and also available as a standalone executable
  • Supports all MSP devices
  • Wiki-based social online community for (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
IAR Embedded Workbench
Provided by IAR Systems IAR Embedded Workbench for MSP430 (EW430)
IAR Embedded Workbench for MSP430 is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. The Debugger is a fully integrated debugger for source and disassembly level debugging (...)
PROGRAMMING TOOLS Download
MSP MCU Programmer and Debugger
MSP-FET To get started developing:
Step 1: Buy the MSP-FET 
Step 2: Refer to the debuggers user’s guide and hardware user’s guide.
Step 3: Refer to debugging video

**The second generation of the MSP-FET is supported in the IDEs since Code Composer Studio™ v7.0, IAR EW430 v7.1 and IAR EWAR v8.10. For use (...)

$115.00
Features
  • USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging
  • Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments
  • (...)
PROGRAMMING TOOLS Download
MSP-GANG Production Programmer
MSP-GANG The MSP Gang Programmer is a MSP430/MSP432 device programmer that can program up to eight identical MSP430/MSP432 Flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)
Features
  • Quickly and reliably program Flash or FRAM-based MSP devices via RS-232 or USB interface
  • Several programming modes:
    • Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
    • Program from Image – An image can be stored, which contains configuration options and code (...)
PROGRAMMING TOOLS Download
MSP Flasher - Command Line Programmer
MSP430-FLASHER MSP Flasher is an open-source, shell-based interface for programming MSP430™ microcontrollers (MCUs) and SimpleLink™ MSP432™ MCUs  through a MSP Debug Stack and provides the most common functions on the command line. MSP Flasher can be used to download binary files (.txt/.hex) directly to the MSP (...)
SUPPORT SOFTWARE Download
SLAC539I.ZIP (303 KB)

CAD/CAE symbols

Package Pins Download
LQFP (PZ) 100 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​