Home Datenwandler Analog-Digital-Wandler (ADCs) Präzisions-ADCs
Home
Datenwandler
Analog-Digital-Wandler (ADCs)
Präzisions-ADCs

ADS1287

AKTIV

Energieeffizienter Delta-Sigma-ADC, 1 KSPS, 1 Kanal, mit PGA für seismische und Energie-Exploration

Jetzt bestellen
Datenblatt

ADS1287

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Resolution (Bits) 24 Sample rate (max) (ksps) 1 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.6, 1 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 4.5 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 119 Digital supply (min) (V) 2.25 Digital supply (max) (V) 3.6
Resolution (Bits) 24 Sample rate (max) (ksps) 1 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.6, 1 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 4.5 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 119 Digital supply (min) (V) 2.25 Digital supply (max) (V) 3.6
VQFN (RHF) 24 20 mm² (5 mm × 4 mm)
  • Selectable Operating Modes
  • High-Resolution Mode:
    • SNR: 113 dB (1000 SPS, Gain = 1)
    • Power: 4.5 mW
  • Low-Power Mode:
    • SNR: 110 dB (1000 SPS, Gain = 1)
    • Power: 2.4 mW
  • THD: –115 dB
  • CMRR: 115 dB
  • High-Impedance CMOS PGA
    • Gains 1, 2, 4, 8, and 16
  • Data Rates: 62.5 SPS to 1000 SPS
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear and Minimum Phase Response
    • Programmable High-Pass Filter
  • Offset and Gain Calibration
  • Synchronization Control
  • SPI-Compatible Interface
  • Analog Power Supply: 5 V or ±2.5 V
  • Digital Power Supply: 2.5 V to 3.3 V
  • Selectable Operating Modes
  • High-Resolution Mode:
    • SNR: 113 dB (1000 SPS, Gain = 1)
    • Power: 4.5 mW
  • Low-Power Mode:
    • SNR: 110 dB (1000 SPS, Gain = 1)
    • Power: 2.4 mW
  • THD: –115 dB
  • CMRR: 115 dB
  • High-Impedance CMOS PGA
    • Gains 1, 2, 4, 8, and 16
  • Data Rates: 62.5 SPS to 1000 SPS
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear and Minimum Phase Response
    • Programmable High-Pass Filter
  • Offset and Gain Calibration
  • Synchronization Control
  • SPI-Compatible Interface
  • Analog Power Supply: 5 V or ±2.5 V
  • Digital Power Supply: 2.5 V to 3.3 V

The ADS1287 device is a low-power, analog-to-digital converter (ADC), with an integrated programmable gain amplifier (PGA) and finite-impulse-response (FIR) digital filter. The ADC is suitable for the demanding needs of seismic equipment requiring precision digitizing with low power consumption.

The ADC features a programmable-gain, high-impedance complementary metal oxide semiconductor (CMOS) amplifier, suitable for direct connection of geophone and hydrophone sensors to the ADC over a wide range of input signals (±2.5 V to ±0.156 V).

The ADC incorporates a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator. The modulator digital output is filtered and decimated by the internal FIR digital filter to yield the ADC conversion result.

The FIR digital filter provides data rates up to 1000 samples per second (SPS). The high-pass filter (HPF) removes DC and low frequency components from the conversion result. On-chip gain and offset scaling registers support system calibration.

Together, the amplifier, modulator, and digital filter dissipate 4.5 mW in high-resolution mode (2.4 mW in low-power mode). The ADC is packaged in a compact 5-mm × 4-mm VQFN package. The ADC is fully specified over the –40°C to +85°C temperature range.

The ADS1287 device is a low-power, analog-to-digital converter (ADC), with an integrated programmable gain amplifier (PGA) and finite-impulse-response (FIR) digital filter. The ADC is suitable for the demanding needs of seismic equipment requiring precision digitizing with low power consumption.

The ADC features a programmable-gain, high-impedance complementary metal oxide semiconductor (CMOS) amplifier, suitable for direct connection of geophone and hydrophone sensors to the ADC over a wide range of input signals (±2.5 V to ±0.156 V).

The ADC incorporates a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator. The modulator digital output is filtered and decimated by the internal FIR digital filter to yield the ADC conversion result.

The FIR digital filter provides data rates up to 1000 samples per second (SPS). The high-pass filter (HPF) removes DC and low frequency components from the conversion result. On-chip gain and offset scaling registers support system calibration.

Together, the amplifier, modulator, and digital filter dissipate 4.5 mW in high-resolution mode (2.4 mW in low-power mode). The ADC is packaged in a compact 5-mm × 4-mm VQFN package. The ADC is fully specified over the –40°C to +85°C temperature range.
filter Andere Präzisions-ADCs suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie der verglichene Baustein.
ADS1285 AKTIV Hochauflösender 32-Bit-Zweikanal-Delta-Sigma-ADC für seismische Untersuchungen und die Georaum-Er Higher dynamic range (134 dB), two channel

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt ADS1287 Low-Power, 1000-SPS, Wide-Bandwidth, Analog-to-Digital Converter With Programmable Gain Amplifier datasheet (Rev. B) PDF | HTML 27.08.2019
Anwendungshinweis Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 18.03.2024
Anwendungshinweis QFN and SON PCB Attachment (Rev. C) PDF | HTML 06.12.2023
Anwendungshinweis Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 29.03.2023
E-book Fundamentals of Precision ADC Noise Analysis (Rev. A) 19.06.2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

ADS1287 IBIS Model

SBAM326.ZIP (62 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

Der Rechner für Analogtechniker beschleunigt viele der sich wiederholenden Berechnungen, die Entwickler von analogen Schaltungsdesigns regelmäßig durchführen müssen. Dieses PC-basierte Tool bietet eine grafische Schnittstelle mit einer Liste verschiedener gebräuchlicher Berechnungen. Das Spektrum (...)

Unterstützte Produkte und Hardware
Designtool

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RHF) 24 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos