ADS8201

AKTIV

Energieeffizienter 8-kanaliger DAS, 2,2 bis 5,5 V, 12 Bit 100 kSPS, mit PGA and SPI™

Jetzt bestellen

Datenblatt

document-pdfAcrobat 2.2V to 5.5V, Low-Power, 12-Bit, 100kSPS, 8-Ch Data Acq System with PGA and SPI datasheet (Rev. B) (Englisch)

ADS8201

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Resolution (Bits)

12

Sample rate (max) (ksps)

100

Number of input channels

8

Interface type

SPI

Architecture

SAR

Input type

Differential, Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Features

Oscillator, PGA

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

1.32

Analog supply voltage (min) (V)

2.2

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

2.2

Digital supply (max) (V)

5.5

Resolution (Bits)

12

Sample rate (max) (ksps)

100

Number of input channels

8

Interface type

SPI

Architecture

SAR

Input type

Differential, Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Features

Oscillator, PGA

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

1.32

Analog supply voltage (min) (V)

2.2

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

2.2

Digital supply (max) (V)

5.5

VQFN (RGE)

24

16 mm² (4 mm × 4 mm)

Low-Power, Flexible Supply Range:
- 2.2V to 5.5V Analog Supply
- 1.32mW (100kHz, +VA = 2.2V, +VD = 2.2V)
- 4.5mW (100kHz, +VA = 5V, +VD = 5V)
Up to 100kSPS Throughput Rate
Excellent DC Performance:
- ±0.5 LSB typ, ±1.5 LSB max INL
- ±0.5 LSB typ, ±1.0 LSB max DNL
- ±6 LSB Offset Error at +VA =5V
- ±0.1%FS Gain Error at +VA = 5V
Flexible Analog Inputs:
- True Differential Input
- Differential/Unipolar Input Range (0 to V_REF)
- TAG Bit Output
- Programmable Averaging Function
- Onboard, Eight Single-Ended/Four Differential Channel Mux:
  - High Input Impedance
  - High-Performance PGA (Gain = 1/2/4/8)
  - PGA Breakout
  - Auto/Manual Channel Select with Gain
  - Auto/Manual Trigger
  - Mixed Type Partial Scan
Built-in Hardware Features:
- On-chip Conversion Clock (CCLK)
- Hardware/Software Reset
- Programmable Status/Polarity for BUSY/INT
Flexible I/O:
- SPI-/DSP™-Compatible Serial Interface
- Separate I/O Supply (2.2V to 5.5V)
- Onboard 8×1 FIFO Buffer
- SCLK up to 25MHz (VD = 5V)
Multi-Chip Ready and Fully Enabled:
- Global CONVST (Independent of CS)
Power-Down Mode
24-Pin 4×4 QFN Package
APPLICATIONS
- Portable Communications
- Transducer Interfaces
- Portable Medical Instruments
- Data Acquisition Systems
- GPS Chipsets

DSP is a trademark of Texas Instruments.
SPI is a trademark of Motorola Inc.
All other trademarks are the property of their respective owners

Low-Power, Flexible Supply Range:
- 2.2V to 5.5V Analog Supply
- 1.32mW (100kHz, +VA = 2.2V, +VD = 2.2V)
- 4.5mW (100kHz, +VA = 5V, +VD = 5V)
Up to 100kSPS Throughput Rate
Excellent DC Performance:
- ±0.5 LSB typ, ±1.5 LSB max INL
- ±0.5 LSB typ, ±1.0 LSB max DNL
- ±6 LSB Offset Error at +VA =5V
- ±0.1%FS Gain Error at +VA = 5V
Flexible Analog Inputs:
- True Differential Input
- Differential/Unipolar Input Range (0 to V_REF)
- TAG Bit Output
- Programmable Averaging Function
- Onboard, Eight Single-Ended/Four Differential Channel Mux:
  - High Input Impedance
  - High-Performance PGA (Gain = 1/2/4/8)
  - PGA Breakout
  - Auto/Manual Channel Select with Gain
  - Auto/Manual Trigger
  - Mixed Type Partial Scan
Built-in Hardware Features:
- On-chip Conversion Clock (CCLK)
- Hardware/Software Reset
- Programmable Status/Polarity for BUSY/INT
Flexible I/O:
- SPI-/DSP™-Compatible Serial Interface
- Separate I/O Supply (2.2V to 5.5V)
- Onboard 8×1 FIFO Buffer
- SCLK up to 25MHz (VD = 5V)
Multi-Chip Ready and Fully Enabled:
- Global CONVST (Independent of CS)
Power-Down Mode
24-Pin 4×4 QFN Package
APPLICATIONS
- Portable Communications
- Transducer Interfaces
- Portable Medical Instruments
- Data Acquisition Systems
- GPS Chipsets

DSP is a trademark of Texas Instruments.
SPI is a trademark of Motorola Inc.
All other trademarks are the property of their respective owners

The ADS8201 is a low-power, complete on-chip data acquisition system optimized for portable applications that require direct connections, wide dynamic range, and automatic operation with very low power consumption. The device includes a 12-bit, capacitor-based, successive approximation register (SAR) analog-to-digital converter (ADC); a high-performance, continuous-time programmable gain amplifier (PGA); and a fully automatic scan, 8-to-1 multiplexer (mux) with breakout to allow for system design flexibility.

Many other features are included to further optimize system operation. Conversion results may be saved in an onboard first-in/first-out (FIFO) buffer and read out at a later time. Each channel has a gain setting that can be loaded automatically when it is selected. To simplify the serial port design, the ADS8201 offers a high-speed, wide-voltage serial interface. The ADS8201 is ideal for sensor applications (for example, bridge sensors, pressure sensors, accelerometers, gyrosensors, temperature sensors, etc.) as used in gaming and navigation.

The ADS8201 is available in a 24-lead, 4×4 QFN package, and is specified over the –40°C to +85°C industrial temperature range.

The ADS8201 is a low-power, complete on-chip data acquisition system optimized for portable applications that require direct connections, wide dynamic range, and automatic operation with very low power consumption. The device includes a 12-bit, capacitor-based, successive approximation register (SAR) analog-to-digital converter (ADC); a high-performance, continuous-time programmable gain amplifier (PGA); and a fully automatic scan, 8-to-1 multiplexer (mux) with breakout to allow for system design flexibility.

Many other features are included to further optimize system operation. Conversion results may be saved in an onboard first-in/first-out (FIFO) buffer and read out at a later time. Each channel has a gain setting that can be loaded automatically when it is selected. To simplify the serial port design, the ADS8201 offers a high-speed, wide-voltage serial interface. The ADS8201 is ideal for sensor applications (for example, bridge sensors, pressure sensors, accelerometers, gyrosensors, temperature sensors, etc.) as used in gaming and navigation.

The ADS8201 is available in a 24-lead, 4×4 QFN package, and is specified over the –40°C to +85°C industrial temperature range.

filter

Andere Präzisions-ADCs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 5

Top-Dokumentation	Typ	Titel	Datum
*	Datenblatt	2.2V to 5.5V, Low-Power, 12-Bit, 100kSPS, 8-Ch Data Acq System with PGA and SPI datasheet (Rev. B)	10.05.2010
	E-book	Best of Baker's Best: Precision Data Converters -- SAR ADCs	21.05.2015
	Anwendungshinweis	Determining Minimum Acquisition Times for SAR ADCs, part 2	17.03.2011
	Anwendungshinweis	Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)	10.11.2010
	Anwendungshinweis	Obtaining 17 Bits of Resolution using a 12-Bit A/D System on a Chip	24.06.2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell