Produktdetails

Number of input channels 6 Resolution (Bits) 14 Sample rate (max) (Msps) 3000 Frequency (min) (MHz) 600 Frequency (max) (MHz) 12000 Features High-performance, Input buffer Analog input BW (MHz) 12000 SFDR (dB) 80 Power consumption (typ) (mW) 6359 Operating temperature range (°C) to Rating Catalog
Number of input channels 6 Resolution (Bits) 14 Sample rate (max) (Msps) 3000 Frequency (min) (MHz) 600 Frequency (max) (MHz) 12000 Features High-performance, Input buffer Analog input BW (MHz) 12000 SFDR (dB) 80 Power consumption (typ) (mW) 6359 Operating temperature range (°C) to Rating Catalog
FCBGA (ALK) 400 289 mm² 17 x 17
  • Request full data sheet
  • Radiation hardness assured AFE7950-SP:
    • Single-event latch up (SEL): 70MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 100krad (Si)
  • Radiation tolerant AFE7950-SEP:
    • Single-event latch up (SEL): 43MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 30krad (Si)
  • Four RF sampling 12GSPS TX DACs
  • Six RF sampling 3GSPS RX ADCs
  • Maximum RF signal bandwidth: 1200MHz (or 2400MHz for 2TX)
  • RF frequency range:
    • TX: 600MHz to 12GHz
    • RX: 5MHz to 12GHz
  • Digital Step Attenuators (DSA):
    • TX: 40dB range, 0.125dB steps
    • RX or FB: 25dB range, 0.5dB steps
  • Single or dual-band DUC or DDCs for TX and RX
  • SerDes data interface:
    • 8 SerDes transceivers up to 24.75Gbps
    • JESD204B/C subclass 1 compatible
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch
  • Space screening and assurance:
    • Meets ASTM E595 outgassing specification (AFE7950-SP, AFE7950-SEP)
    • One fabrication, assembly, and test site
    • Wafer lot traceability
    • Extended product life cycle
    • Radiation lot acceptance test (RLAT) (AFE7950-SP, AFE7950-SEP)
    • Production burn-in (AFE7950-SP)
  • This device contains non-encapsulated chip-caps with tin (Sn) finish of >97% purity. See reliability report for more information
  • Request full data sheet
  • Radiation hardness assured AFE7950-SP:
    • Single-event latch up (SEL): 70MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 100krad (Si)
  • Radiation tolerant AFE7950-SEP:
    • Single-event latch up (SEL): 43MeV-cm2/mg
    • RLAT Total ionizing dose (TID): 30krad (Si)
  • Four RF sampling 12GSPS TX DACs
  • Six RF sampling 3GSPS RX ADCs
  • Maximum RF signal bandwidth: 1200MHz (or 2400MHz for 2TX)
  • RF frequency range:
    • TX: 600MHz to 12GHz
    • RX: 5MHz to 12GHz
  • Digital Step Attenuators (DSA):
    • TX: 40dB range, 0.125dB steps
    • RX or FB: 25dB range, 0.5dB steps
  • Single or dual-band DUC or DDCs for TX and RX
  • SerDes data interface:
    • 8 SerDes transceivers up to 24.75Gbps
    • JESD204B/C subclass 1 compatible
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch
  • Space screening and assurance:
    • Meets ASTM E595 outgassing specification (AFE7950-SP, AFE7950-SEP)
    • One fabrication, assembly, and test site
    • Wafer lot traceability
    • Extended product life cycle
    • Radiation lot acceptance test (RLAT) (AFE7950-SP, AFE7950-SEP)
    • Production burn-in (AFE7950-SP)
  • This device contains non-encapsulated chip-caps with tin (Sn) finish of >97% purity. See reliability report for more information

The AFE7950-x is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 12GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth for four TX or 2400MHz for two TX. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1dB analog and 0.125dB digital steps.

Each receiver chain includes a 25dB range Digital Step Attenuator (DSA), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200MHz for four RX without FB paths or 600MHz with two FB paths (1200MHz BW each).

The AFE7950-x is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 12GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth for four TX or 2400MHz for two TX. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1dB analog and 0.125dB digital steps.

Each receiver chain includes a 25dB range Digital Step Attenuator (DSA), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200MHz for four RX without FB paths or 600MHz with two FB paths (1200MHz BW each).

Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Sehen Sie sich das vollständige Datenblatt und andere Design-Ressourcen für die Allzweck-AFEs an. Jetzt anfordern

Für kommerzielle Drahtlos-Anwendungen, siehe unsere Drahtlosinfrastruktur-AFEs.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet AFE7950-x 4T6R RF Sampling AFE with 12GSPS DACs and 3GSPS ADCs datasheet (Rev. B) PDF | HTML 16 Jun 2026
* Radiation & reliability report AFE7950-SEP Single Event Effects Report PDF | HTML 19 Mai 2026
* Radiation & reliability report AFE7950-SEP Production Flow and Reliability Report PDF | HTML 18 Mai 2026
* Radiation & reliability report AFE7950-SEP Total Ionizing Dose (TID) Radiation Report (Rev. A) 13 Mai 2026
Application note Cold Sparing on AFE7950-SP and AFE7950-SEP 03 Jul 2025
White paper How Innovative Semiconductors for Sensing Payloads in Satellites Help us Better Understand our World PDF | HTML 04 Feb 2025
Technical article Phased array antenna systems: A new paradigm for electronics in satellites (Rev. A) PDF | HTML 11 Jun 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AFE7900EVM — AFE7900-Evaluierungsmodul für RF-Sampling-AFE mit vier Sende-, sechs Empfangsfrequenzen, 5 MHz bis 7

Das Evaluierungsmodul der AFE7900-Familie (EVM) ist eine flexible HF-Sampling-Transceiver-Plattform, die so konfiguriert werden kann, dass sie gleichzeitig bis zu vier Sende- und zwei Empfangskanäle (4T4R+2FB) unterstützt. Die EVM-Schnittstellen sind mit der unten abgebildeten (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Evaluierungsplatine

AFE7950EVM — AFE7950 X-Band-HF-Sampling-AFE mit vier Sende- und sechs-Empfangsketten – Evaluierungsmodul

Das Evaluierungsmodul der AFE7950-Familie (EVM) ist eine flexible HF-Sampling-Transceiver-Plattform, die so konfiguriert werden kann, dass sie gleichzeitig bis zu vier Sende- und zwei Empfangskanäle (4T4R+2FB) unterstützt. Die EVM-Schnittstellen sind mit der unten abgebildeten (...)

Treiber oder Bibliothek

AFE79XX-HSC-DESIGN AFE79xx family high-speed transceiver design & support files

Find detailed product information on the AFE79xx product family (datasheets, EVM resources, software and firmware, reference designs, etc)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Referenzdesigns

TIDA-010260 — Referenzdesign für integrierten 4T5R-Transceiver, raumfahrttauglich

Das Referenzdesign für einen integrierten raumfahrttauglichen 4T5R-Transceiver umfasst einen vollständigen HF-Sampling-Transceiver einschließlich einer Taktlösung und einer Stromversorgungslösung. Das Design umfasst alle SEP-qualifizierten Bausteine von TI und alle raumfahrttauglichen passiven (...)
Design guide: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCBGA (ALK) 400 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos