Produktdetails

Frequency range 76 - 81 GHz Number of receivers 4 Number of transmitters 3 ADC sampling rate (max) (Msps) 37.5 Interface type MIPI-CSI2, SPI, UART Edge AI enabled No Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Compliant Power supply solution LP87524B-Q1, LP87524J-Q1, LP87524P-Q1, LP87745-Q1
Frequency range 76 - 81 GHz Number of receivers 4 Number of transmitters 3 ADC sampling rate (max) (Msps) 37.5 Interface type MIPI-CSI2, SPI, UART Edge AI enabled No Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Compliant Power supply solution LP87524B-Q1, LP87524J-Q1, LP87524P-Q1, LP87745-Q1
FCCSP (ABL) 161 108.16 mm² (10.4 mm × 10.4 mm)
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, Baseband, and ADC
    • 76- to 81-GHz coverage with 4 GHz available bandwidth
    • Four receive channels
    • Three transmit channels (two can be used simultaneously)
    • Ultra-accurate chirp engine based on fractional-N PLL
    • TX power: 12 dBm
    • RX noise figure:
      • 14 dB (76 to 77 GHz)
      • 15 dB (77 to 81 GHz)
    • Phase noise at 1 MHz:
      • –95 dBc/Hz (76 to 77 GHz)
      • –93 dBc/Hz (77 to 81 GHz)
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI
    • Data interface with external processor over MIPI D-PHY and CSI2 V1.1
    • Interrupts for fault reporting
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 functional safety system design up to ASIL-D
    • Hardware integrity up to ASIL-B
    • Safety-related certification
      • ISO 26262 certified upto ASIL B by TUV SUD
  • AEC-Q100 qualified
  • Device advanced features
    • Embedded self-monitoring with no host processor involvement
    • Complex baseband architecture
    • Embedded interference detection capability
  • Power management
    • Built-in LDO network for enhanced PSRR
    • I/Os support dual voltage 3.3 V/1.8 V
  • Clock source
    • Supports externally driven clock (square/sine) at 40 MHz
    • Supports 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, Baseband, and ADC
    • 76- to 81-GHz coverage with 4 GHz available bandwidth
    • Four receive channels
    • Three transmit channels (two can be used simultaneously)
    • Ultra-accurate chirp engine based on fractional-N PLL
    • TX power: 12 dBm
    • RX noise figure:
      • 14 dB (76 to 77 GHz)
      • 15 dB (77 to 81 GHz)
    • Phase noise at 1 MHz:
      • –95 dBc/Hz (76 to 77 GHz)
      • –93 dBc/Hz (77 to 81 GHz)
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI
    • Data interface with external processor over MIPI D-PHY and CSI2 V1.1
    • Interrupts for fault reporting
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 functional safety system design up to ASIL-D
    • Hardware integrity up to ASIL-B
    • Safety-related certification
      • ISO 26262 certified upto ASIL B by TUV SUD
  • AEC-Q100 qualified
  • Device advanced features
    • Embedded self-monitoring with no host processor involvement
    • Complex baseband architecture
    • Embedded interference detection capability
  • Power management
    • Built-in LDO network for enhanced PSRR
    • I/Os support dual voltage 3.3 V/1.8 V
  • Clock source
    • Supports externally driven clock (square/sine) at 40 MHz
    • Supports 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C

The AWR1243 device is an integrated single-chip FMCW transceiver capable of operation in the 76- to 81-GHz band. The device enables unprecedented levels of integration in an extremely small form factor. AWR1243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR1243 device is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform solution including TI reference designs, software drivers, sample configurations, API guides, and user documentation.

The AWR1243 device is an integrated single-chip FMCW transceiver capable of operation in the 76- to 81-GHz band. The device enables unprecedented levels of integration in an extremely small form factor. AWR1243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR1243 device is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform solution including TI reference designs, software drivers, sample configurations, API guides, and user documentation.

Herunterladen Video mit Transkript ansehen Video
Preisgekrönte Sensoren jetzt verfügbar

Der AWR1243 ist Teil des preisgekrönten mmWave-Sensorportfolios von TI. Zu den jüngsten Auszeichnungen gehören:

  • CES 2018 Innovation Award Honoree in drei Kategorien
  • Electronic Products 2017 Produkt des Jahres in der Kategorie Sensorik
  • 2017 Annual Creativity in Electronics (ACE) Award für den Sensor des Jahres
  • Elektronik 2018 Reader's Choice Produkt des Jahres in der Kategorie Aktive Komponenten

Ähnliche Produkte, die für Sie interessant sein könnten

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.
AWR2243 AKTIV Hochleistungs-MMIC der zweiten Generation für Fahrzeuganwendungen mit 76 bis 81 GHz This product is the second-generation update with higher RF performance and cascade feature support.

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 39
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt AWR1243 Single-Chip 77- and 79-GHz FMCW Transceiver datasheet (Rev. D) PDF | HTML 16.07.2021
* Errata AWR1243 Device Errata Silicon Revisions 1.0, 2.0, and 3.0 (Rev. D) PDF | HTML 31.12.2020
Anwendungshinweis Getting Started with mmWave Sensors PDF | HTML 12.03.2025
Informationen zur funktionalen Sicherheit Design Guide for Functional Safety Compliant Systems using mmWave Radar Sensors (Rev. A) PDF | HTML 04.04.2024
Informationen zur funktionalen Sicherheit TUV SUD Functional Safety Certificate for AWR Devices (Rev. A) 11.01.2024
Anwendungshinweis Self-Calibration of mmWave Radar Devices (Rev. C) PDF | HTML 11.01.2023
Anwendungshinweis Interference Mitigation For AWR/IWR Devices (Rev. A) PDF | HTML 22.09.2022
Informationen zur funktionalen Sicherheit Report on the Certificate Z10 088989 0023 Rev. 00 04.02.2022
Anwendungshinweis mmWave Radar Radome Design Guide PDF | HTML 17.08.2021
Anwendungshinweis mmWave Production Testing Overview PDF | HTML 10.04.2021
Anwendungshinweis Power Management Optimizations - Low Cost LC Filter Solution (Rev. A) PDF | HTML 11.11.2020
Whitepaper The fundamentals of millimeter wave radar sensors (Rev. A) 27.08.2020
Anwendungshinweis Programming Chirp Parameters in TI Radar Devices (Rev. A) 13.02.2020
Anwendungshinweis AWR1xx and AWR22xx Data Path Programmer’s Guide (Rev. A) 13.02.2020
Anwendungshinweis AWR1243 Bootloader Flow (Rev. B) 06.02.2020
Designleitfaden Imaging Radar Using Cascaded mmWave Sensor Reference Design (Rev. A) 25.07.2019
Anwendungshinweis How to select the right proximity sensor technology 19.07.2019
Anwendungshinweis AWR2243 Cascade (Rev. B) PDF | HTML 16.05.2019
Anwendungshinweis MIMO Radar (Rev. A) 26.07.2018
Whitepaper mmWave radar: Enabling greater intelligent autonomy at the edge 06.06.2018
Technischer Artikel Tips for designing a robust computer vision system for self-driving cars PDF | HTML 09.05.2018
Anwendungshinweis TI mmWave Radar sensor RF PCB Design, Manufacturing and Validation Guide 07.05.2018
Technischer Artikel Smart sensors are going to change how you drive (because eventually, you won’t) PDF | HTML 25.04.2018
Anwendungshinweis CMOS MMIC Ready for Road – A Technology Overview 28.02.2018
Technischer Artikel The picture of the distance: Detecting range to help mmWave sensors understand the PDF | HTML 22.02.2018
Whitepaper Reliability advantages of TI flip-chip BGA packaging 25.01.2018
Technischer Artikel A smarter world will arrive in waves PDF | HTML 09.01.2018
Whitepaper 77GHz single chip radar sensor enables automotive body and chassis applications 12.12.2017
Technischer Artikel CMOS technology enables the lowest power consumption mmWave sensors for automotive PDF | HTML 29.11.2017
Technischer Artikel mmWave fundamentals: Range, velocity and angle PDF | HTML 01.11.2017
Technischer Artikel Why are automotive radar systems moving from 24GHz to 77GHz? PDF | HTML 25.10.2017
Whitepaper Moving from legacy 24GHz to state-of-the-art 77GHz radar 06.10.2017
Whitepaper Cities grow smarter through innovative semiconductor technologies 07.07.2017
Technischer Artikel Giving cars advanced vision through TI mmWave sensors PDF | HTML 16.05.2017
Weitere Dokumente TI Resource Explorer (TIREX) mmWave Training Series 15.05.2017
Anwendungshinweis System Performance Measurement With the mmWave Sensor 10.05.2017
Whitepaper Using a complex-baseband architecture in FMCW radar systems 17.04.2017
Whitepaper TI smart sensors enable automated driving 17.04.2017
Whitepaper AWR1243 sensor: Integrated 76- to 81-GHz radar front end for emerging ADAS apps 17.04.2017

Design und Entwicklung

Lösungen für die Stromversorgung

Verfügbare Lösungen für die Stromversorgung für den AWR1243 finden. TI bietet Stromversorgungslösungen für Ein-Chip-Systeme (SoCs), Prozessoren, Mikrocontroller, Sensoren und feldprogrammierbare Gate-Arrays (FPGAs) von TI und von Fremdherstellern an.

Evaluierungsplatine

AWR1243BOOST — AWR1243 76-GHz- bis 81-GHz-Hochleistungs-MMIC-Evaluierungsmodul für die Automobilindustrie

Das AWR1243 BoosterPack™-Plug-in-Modul ist eine anwenderfreundliche Evaluierungsplatine für den AWR1243-mmWave-Sensorbaustein mit einem Chip.

AWR1243BOOST enthält alles, was Sie zum Einstieg in die Entwicklung mit der MMWAVE-STUDIO-Umgebung und dem Echtzeit-Datenerfassungsadapter DCA1000 benötigen.

(...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

DCA1000EVM — DCA1000-Evaluierungsmodul für Echtzeit-Datenerfassung und -Streaming

Das DCA1000-Evaluierungsmodul (EVM) bietet Echtzeit-Datenerfassung und -Streaming für zwei- und vierspurigen LVDS-Verkehr (Low Voltage Differential Signaling) von TI AWR und IWR Radarsensor-EVMs. Die Daten können in Echtzeit über 1-Gbit/s-Ethernet an einen PC übertragen werden, auf dem das (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Hardware-Programmiertool

HS-3P-77-3D-WGA-LOP-4X4 — Antennendesign für ADAS-Radarsensoren von HUBER+SUHNER

77 GHz 3D-Wellenleiterantenne 4Tx4R – Produktfamilie für Substrat-unabhängige HF-Lösungen

HUBER+SUHNER hat eine metallisierte 3D-Kunststoff-Wellenleiterantenne der zweiten Generation entwickelt und produziert, die für Substrat-unabhängige HF-Lösungen entwickelt wurde. Diese innovative Technologie, (...)

Unterstützte Produkte und Hardware
Third-party accessory

GAPW-3P-ANTENNA — Antennendesign für ADAS-Radarsensoren von GapWaves

Gapwaves offers high-performance, low-loss, and cost-efficient waveguide antennas for short-, mid- and long-range automotive radars and industrial applications. Our antennas feature a flexible design and a compact form factor, robust contact-free PCB integration and support contact-free LoP (...)

Von: Gapwaves
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

MMWAVE-STUDIO — mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

MMWAVE-STUDIO ist eine eigenständige Windows®-GUI mit der Möglichkeit, mmWave-Sensormodule zu konfigurieren und zu steuern und Analog-zu-Digital (ADC)-Daten für die Offline-Analyse zu erfassen. Die ADC-Datenerfassung soll die Evaluierung und Charakterisierung der HF-Leistung sowie die (...)

Unterstützte Produkte und Hardware
Onlineschulungen

RADAR-ACADEMY — mmWave Radar Academy

The Radar Academy is a documentation package intended to provide educational resources related to mmWave radar technology
Unterstützte Produkte und Hardware
Erste Schritte

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware
Firmware

MMWAVE-DFP — mmWave device firmware package (DFP) for 1st-generation AWR1243 parts

mmWave –DFP is a device firmware package for TI’s 77GHz RF transceiver devices (AWR1243, AWR2243). This package provides firmware/ROM patches and API that provides seamless control and configuration for the RF operation in real-time from an external host device as well as allow periodic (...)

Unterstützte Produkte und Hardware
GUI für Evaluierungsmodul (EVM)

MMWAVE-SENSING-ESTIMATOR-CLOUD — mmWave sensing estimator cloud development on TI Resource Explorer

The mmWave Sensing Estimator is a web-based configuration tool for TI radar sensors
Unterstützte Produkte und Hardware
Software-Programmiertool

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash ist Teil des umfassenden CCStudio™-Entwicklungsökosystem von TI und ein Softwaretool zur Programmierung des integrierten Flash-Speichers von TI-Mikrocontrollern und drahtlosen Kommunikationsbausteinen sowie des integrierten Flash-Speichers für TI-Prozessoren. UniFlash bietet sowohl (...)

Unterstützte Produkte und Hardware
Support-Software

RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools

The Radar Toolbox is a collection of demos, software tools, and documentation designed to assist in the evaluation of TI Radar Devices
Unterstützte Produkte und Hardware
Simulationsmodell

AWR1243 and AWR1443 IBIS Model

SWRM031.ZIP (1245 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

AWR1243 BSDL Model (Rev. B)

SWRM035B.ZIP (274 KB) - BSDL-Modell
Unterstützte Produkte und Hardware
Designtool

MMWAVE-3P-SEARCH — mmWave-Radarsensoren Drittanbieter-Suchtool

TI hat sich mit anderen Unternehmen zusammengeschlossen, um ein breites Spektrum von Lösungen anzubieten, die die mmWave-Radarsensoren von TI und damit verbundene Dienstleistungen nutzen. Diese Unternehmen können mit dem mmWave-Radar ihren Weg in die Fertigung beschleunigen. Laden Sie dieses (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIPA-050046 — mmWave AWR1642 und AWR1243 Stromversorgungsdesign mit dem LP87524J-Q1

Dieses Stromversorgungsdesign beschreibt den optimierten Power Management IC (PMIC) für die Stromversorgung der Radarsensoren AWR1642 und AWR1243. Das technische Referenzhandbuch dient als Referenz für die Standardregisterbits des LP87524B/J/P-Q1, nachdem der OTP-Speicher heruntergeladen wurde. (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIPA-050047 — mmWave AWR1642 und AWR1243 Stromversorgungsdesign mit dem LP87524P-Q1

Dieses Stromversorgungsdesign beschreibt den optimierten Power Management IC (PMIC) für die Stromversorgung der Radarsensoren AWR1642 und AWR1243. Das technische Referenzhandbuch dient als Referenz für die Standardregisterbits des LP87524B/J/P-Q1, nachdem der OTP-Speicher heruntergeladen wurde. (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIPA-050048 — mmWave AWR1642 und AWR1243 Stromversorgungsdesign mit dem LP87524B-Q1

Dieses Stromversorgungsdesign beschreibt den optimierten Power Management IC (PMIC) für die Stromversorgung der Radarsensoren AWR1642 und AWR1243. Das technische Referenzhandbuch dient als Referenz für die Standardregisterbits des LP87524B/J/P-Q1, nachdem der OTP-Speicher heruntergeladen wurde. (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCCSP (ABL) 161 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos