The DRV880x provides a versatile motor driver solution with a variety of capabilities. The device contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor, or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits.
The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880x is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates the needed gate drive voltages.
A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.
Internal protection functions are provided for undervoltage, charge pump fault, overcurrent, short-to-supply, short-to-ground, and overtemperature. Fault conditions are indicated through the nFAULT pin.
The DRV880x is packaged in a 16-pin WQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | DRV880x DMOS Full-Bridge Motor Drivers datasheet (Rev. K) | PDF | HTML | 14.05.2020 | |
| Anwendungshinweis | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 05.07.2024 | ||
| Anwendungshinweis | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 14.10.2021 | ||
| Anwendungshinweis | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 22.07.2021 | ||
| Anwendungshinweis | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 19.01.2021 | ||
| Benutzerhandbuch | DRV8800-01 EVM GUI (Rev. A) | 17.07.2019 | |||
| Technischer Artikel | Using smart relay drivers for smart meters, part 2 | PDF | HTML | 10.12.2018 | ||
| Anwendungshinweis | PowerPAD™ Thermally Enhanced Package (Rev. H) | 06.07.2018 | |||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 12.05.2004 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
The DRV8801 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8801 integrated circuit from Texas Instruments. The DRV8801 is a 2.8A Peak Brushed DC motor driver with brake support and current sense pin who’s output voltage is directly proportional to the motor current.
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| WQFN (RTY) | 16 | Ultra Librarian |
| HTSSOP (PWP) | 16 | Ultra Librarian |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.