Gehäuseinformationen
| Gehäuse | Pins HTSSOP (DDV) | 44 |
| Betriebstemperaturbereich (°C) 0 to 70 |
| Gehäusemenge | Träger 35 | TUBE |
Merkmale von TAS5162
- 2×160 W at 10% THD+N Into 8-
BTL - 2×210 W at 10% THD+N Into 6- BTL
- 1×300 W at 10% THD+N Into 4- PBTL
- >110 dB SNR (A-Weighted, TAS5518 Modulator)
- <0.09% THD+N at 1 W
- Two Thermally Enhanced Package Options:
- DKD (36-pin PSOP3)
- DDV (44-pin HTSSOP)
- High-Efficiency Power Stage (>90%) With 80-m Output MOSFETs
- Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
- Integrated Self-Protection Circuits Including Undervoltage, Overtemperature, Overload, Short Circuit
- Error Reporting
- EMI Compliant When Used With Recommended System Design
- Intelligent Gate Drive
- Mid-Z Ramp Compatible for reduced ‘pop noise’
- APPLICATIONS
- Mini/Micro Audio System
- DVD Receiver
- Home Theater
All other trademarks are the property of their respective owners
Beschreibung von TAS5162
The TAS5162 is a high performance, integrated stereo digital amplifier power stage with an improved protection system. The TAS5162 is capable of driving a 6- bridge-tied load (BTL) at up to 210 W per channel at THD = 10%, low integrated noise at the output, low THD+N performance without clipping, and low idle power dissipation.
A low-cost, high-fidelity audio system can be built using a TI chipset, comprising a modulator (e.g., TAS5508) and the TAS5162.
This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and at 50V for PVDD. The TAS5162 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 6 , which enables the use of smaller power supplies and heatsinks.
The TAS5162 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5162 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.