Home Energiemanagement Highside-Schalter und -Controller Highside-Schalt-Controller
Home
Energiemanagement
Highside-Schalter und -Controller
Highside-Schalt-Controller

TPS4800-Q1

AKTIV

Highside-Treiber für die Automobilindustrie, 100V, mit Schutz- und Diagnosefunktionen, niedriger Ruh

Jetzt bestellen
Datenblatt

TPS4800-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Operating voltage (max) (V) 100 Operating voltage (min) (V) 3.5 Features Fault Diagnostics, High-side RSNS, Low Quiescent Current, Overcurrent protection with adjustable delay, Overvoltage protection, Reverse polarity protection, Short circuit protection, VDS Sensing, adjustable UVLO, high-side or Low-side current sense Reverse polarity protection (V) -65 Quiescent current (Iq) (µA) 43 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Short-circuit protection response time (µs) 4 Operating temperature range (°C) -40 to 125 Rating Automotive
Operating voltage (max) (V) 100 Operating voltage (min) (V) 3.5 Features Fault Diagnostics, High-side RSNS, Low Quiescent Current, Overcurrent protection with adjustable delay, Overvoltage protection, Reverse polarity protection, Short circuit protection, VDS Sensing, adjustable UVLO, high-side or Low-side current sense Reverse polarity protection (V) -65 Quiescent current (Iq) (µA) 43 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Short-circuit protection response time (µs) 4 Operating temperature range (°C) -40 to 125 Rating Automotive
VSSOP (DGX) 19 15.3 mm² 5.1 x 3
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump
  • Low quiescent current, 43µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Strong gate driver (2A source and sink)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, input under voltage and short-circuit comparator diagnosis (SCP_TEST)
  • Fault indication (FLT_GD) for gate drive UVLO
  • Adjustable input undervoltage lockout (UVLO) and overvoltage protection (OV)
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump
  • Low quiescent current, 43µA in operation
  • Low 1.5µA shutdown current (EN/UVLO = Low)
  • Strong gate driver (2A source and sink)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, input under voltage and short-circuit comparator diagnosis (SCP_TEST)
  • Fault indication (FLT_GD) for gate drive UVLO
  • Adjustable input undervoltage lockout (UVLO) and overvoltage protection (OV)

The TPS48000-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–95V, the device is suitable for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

It has a strong (2A) gate drive that enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short circuit protection. Auto-retry and latch-off fault behavior can be configured. By using CS+ and CS– pins, current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

Low quiescent current of 43µA (typical) in operation enables always ON system designs. Quiescent current reduces to 1.5µA (typical) with EN/UVLO low.

The TPS48000-Q1 is available in a 19-pin VSSOP package.

The TPS48000-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–95V, the device is suitable for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

It has a strong (2A) gate drive that enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short circuit protection. Auto-retry and latch-off fault behavior can be configured. By using CS+ and CS– pins, current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

Low quiescent current of 43µA (typical) in operation enables always ON system designs. Quiescent current reduces to 1.5µA (typical) with EN/UVLO low.

The TPS48000-Q1 is available in a 19-pin VSSOP package.
filter Andere Highside-Schalt-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TPS4800-Q1 100V Automotive Low IQ High Side Driver With Reverse Polarity Protection, Short-Circuit Protection and Diagnostics datasheet (Rev. A) PDF | HTML 20 Dez 2024
Functional safety information TPS4800-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 08 Dez 2023
Certificate TPS4800Q1EVM EU Declaration of Conformity (DoC) 19 Mai 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS4800Q1EVM — TPS4800-Q1 – Evaluierungsmodul

TPS4800Q1EVM ermöglicht die Referenzschaltkreisevaluierung des intelligenten Highside-Treibers TPS4800-Q1. Das TPS4800-Q1 ist ein intelligenter Highside-Controller für 3,5 V bis 80 V und besitzt einen starken (2A) Gate-Treiber, der Leistungsschaltungen mit parallelen MOSFETs in (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationsmodell

TPS4800-Q1 PSpice Model

SLUM909.ZIP (152 KB) - PSpice Model
Herunterladen
Berechnungstool

FET-INRUSH-SOA-CALC — FET SOA margin calculator for dvdt based startup

The design calculator allows user to estimate the FET SOA margin while starting up with dVdt based startup for inrush current control
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Berechnungstool

TPS1200-Q1-CALC — TPS1200-Q1 design calculator

The design calculator allows customer to size the external peripheral components while designing with TPS4800-Q1 or TPS1200-Q1 controllers.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSSOP (DGX) 19 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos