Startseite Energiemanagement Highside-Schalter und -Controller High-Side-Schalter
Startseite
Energiemanagement
Highside-Schalter und -Controller
High-Side-Schalter
NEU

TPS482H85-Q1

AKTIV

Intelligenter zweikanaliger Highside-Schalter für die Automobilindustrie, 48 V, 85 mΩ

Jetzt bestellen
Datenblatt

TPS482H85-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
VQFN-HR (CHU) 12 10.5 mm² 3 x 3.5
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter Andere High-Side-Schalter suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TPS1HTC100-Q1 AKTIV Smart-Highside-Lastschalter, 60 V, 4 A, 83 mΩ, mit einstellbarer Strombegrenzung für die Automobi Single channel switch suited for 48V systems

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPS482H85-Q1: 48V, 85mΩ Automotive Dual-Channel Smart High-Side Switch datasheet (Rev. A) PDF | HTML 09 Okt 2025
Functional safety information TPS482H85-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 17 Sep 2025
Application note Charging Capacitive Loads with Smart High-Side Switches PDF | HTML 12 Sep 2025
Certificate TPS482H85EVM EU Declaration of Conformity (DoC) 24 Feb 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS482H85EVM — TPS482H85EVM Evaluierungsmodul für 48-V-Highside-Schalter TPS482H85-Q1

Das TPS482H85EVM ist ein Hardware-Evaluierungsmodul (EVM), welches Hardwareingenieuren ermöglicht, die volle Leistung und Funktionalität des Highside-Schalters TPS482H85-Q1 für den Automobilbereich zu evaluieren. Dieses EVM bietet eine nahtlose Möglichkeit, ein Netzteil an die Eingänge des (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Referenzdesigns

TIDA-020094 — 48V zone reference design

This reference design demonstrates trends in advanced automotive 48V low voltage rail architectures. The design includes the 48V backbone architecture and 48V to 12V power conversion. The reference design highlights 48V load drivers across key products. These products include high side switches (...)
Design guide: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN-HR (CHU) 12 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos