Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

TPS54336A

AKTIV

4,5 V bis 28 V-Eingang, 3 A, Synchron-Abwärtswandler mit Eco-mode(tm)

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 24 Vout (min) (V) 0.8 Features Adjustable soft start, Enable, Light-load efficiency, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 340 Switching frequency (max) (kHz) 340 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 600 Duty cycle (max) (%) 90 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 24 Vout (min) (V) 0.8 Features Adjustable soft start, Enable, Light-load efficiency, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 340 Switching frequency (max) (kHz) 340 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 600 Duty cycle (max) (%) 90 Type Converter
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 VSON (DRC) 10 9 mm² 3 x 3
  • Synchronous 128-mΩ and 84-mΩ MOSFETs for
    3-A Continuous Output Current
  • TPS54335A: Internal 2-ms Soft-Start,
    50-kHz to 1.5-MHz Adjustable Frequency
  • TPS54336A: Adjustable Soft-Start,
     Fixed 340-kHz Frequency
  • Low 2-µA Shutdown, Quiescent Current
  • 0.8-V Voltage Reference with ±0.8%
    Accuracy
  • Current Mode Control
  • Monotonic Startup into Pre-Biased Outputs
  • Pulse Skipping for Light-Load Efficiency
  • Hiccup Mode Overcurrent Protection
  • Thermal Shutdown (TSD) and
    Overvoltage Transition Protection
  • 8-Pin SO PowerPAD and 10-Pin VSON Packages
  • Synchronous 128-mΩ and 84-mΩ MOSFETs for
    3-A Continuous Output Current
  • TPS54335A: Internal 2-ms Soft-Start,
    50-kHz to 1.5-MHz Adjustable Frequency
  • TPS54336A: Adjustable Soft-Start,
     Fixed 340-kHz Frequency
  • Low 2-µA Shutdown, Quiescent Current
  • 0.8-V Voltage Reference with ±0.8%
    Accuracy
  • Current Mode Control
  • Monotonic Startup into Pre-Biased Outputs
  • Pulse Skipping for Light-Load Efficiency
  • Hiccup Mode Overcurrent Protection
  • Thermal Shutdown (TSD) and
    Overvoltage Transition Protection
  • 8-Pin SO PowerPAD and 10-Pin VSON Packages

The TPS5433xA family of devices are synchronous converters with an input-voltage range of 4.5 to 28 V. These devices include an integrated low-side switching FET that eliminates the need for an external diode which reduces component count.

Efficiency is maximized through the integrated 128-mΩ and 84-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well-regulated voltage reference that is 1.5% over temperature.

Cycle-by-cycle current limiting on the high-side MOSFET protects the TPS5433xA family of devices in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time.

The TPS5433xA family of devices are synchronous converters with an input-voltage range of 4.5 to 28 V. These devices include an integrated low-side switching FET that eliminates the need for an external diode which reduces component count.

Efficiency is maximized through the integrated 128-mΩ and 84-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well-regulated voltage reference that is 1.5% over temperature.

Cycle-by-cycle current limiting on the high-side MOSFET protects the TPS5433xA family of devices in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet TPS5433xA 4.5-V to 28-V Input, 3-A Output, Synchronous Step-Down DC-DC Converter datasheet (Rev. D) PDF | HTML 10 Feb 2016
Analog Design Journal Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 29 Aug 2023
User guide TPS54336A Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 07 Okt 2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS54336AEVM-010 — Evaluierungsmodul für TPS54336A synchronen Abwärtswandler

TPS54336AEVM-010 ist ein vollständig montierter und getesteter Schaltkreis zur Evaluierung des SWIFT™-Synchron-Abwärtswandlers TPS54366A. Das EVM wandelt eine Eingangsspannung von 8 V bis 28 V in eine geregelte Ausgangsspannung von 5 V um, die bis zu 3 A liefert. TPS54336A ermöglicht kleine Designs (...)

Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPS54336A TINA-TI Average Reference Design

SLVM979.TSC (235 KB) - TINA-TI Reference Design
Simulationsmodell

TPS54336A TINA-TI Average Spice Model

SLVM980.ZIP (7 KB) - TINA-TI Spice Model
Simulationsmodell

TPS54336A Unencrypted PSpice Average Model Package (Rev. A)

SLVM898A.ZIP (29 KB) - PSpice Model
Simulationsmodell

TPS54336A Unencrypted PSpice Transient Model Package (Rev. A)

SLVMAM8A.ZIP (97 KB) - PSpice Model
Referenzdesigns

TIDA-01365 — Referenzdesign zu bidirektionalem RS-485-Fan-Out-Hub

Das Referenzdesign für einen bidirektionalen RS-485-Fanout-Hub (TIDA-01365) dokumentiert und testet ein RS-485-Fanout-Hub-Design, bei dem 1:N- und N:1-RS-485-Signale in und aus jeder Bustopologie aggregiert werden. Dieses Design verfügt auch über eine automatische Richtungssteuerung für eine (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HSOIC (DDA) 8 Ultra Librarian
VSON (DRC) 10 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos