Home Energiemanagement Linear- und Low-Dropout-Regler (LDO)
Home
Energiemanagement
Linear- und Low-Dropout-Regler (LDO)
NEU

TPS7A14-Q1

AKTIV

Automotive, 1A, low-input-voltage and low-output-voltage, ultra-low dropout regulator

Jetzt bestellen
Datenblatt

TPS7A14-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Vin (max) (V) 2.2 Vin (min) (V) 0.7 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 2 Vout (min) (V) 0.5 Fixed output options (V) 0.5, 0.6, 0.75, 0.8, 0.9, 1, 1.05, 1.1, 1.2, 1.8 Noise (µVrms) 7.2 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 0.0056 Features Enable, Output discharge Thermal resistance θJA (°C/W) 72.7 TI functional safety category Functional Safety-Compliant Load capacitance (min) (µF) 1.5 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 140 Operating temperature range (°C) -40 to 125
Rating Automotive Vin (max) (V) 2.2 Vin (min) (V) 0.7 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 2 Vout (min) (V) 0.5 Fixed output options (V) 0.5, 0.6, 0.75, 0.8, 0.9, 1, 1.05, 1.1, 1.2, 1.8 Noise (µVrms) 7.2 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 0.0056 Features Enable, Output discharge Thermal resistance θJA (°C/W) 72.7 TI functional safety category Functional Safety-Compliant Load capacitance (min) (µF) 1.5 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 140 Operating temperature range (°C) -40 to 125
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: -40°C to +125°C
    • Junction temperature: -40°C to +150°C
  • Ultra-low input voltage range: 0.7V to 2.2V
  • High efficiency:
    • Dropout voltage at 1A: 140mV max
    • Specified for VIN = VOUT +150mV
  • Excellent load transient response:
    • 25mV for ILOAD = 3mA to 500mA in 20µs
  • Accuracy over load, line, and temperature: +1%, -1.25%
  • High PSRR:
    • 80dB at 1kHz (VOUT = 0.8V, IOUT = 500mA)
  • Available in fixed-output voltages:
    • 0.5V to 2.0V (in 25mV steps)
  • VBIAS range: 2.2V to 5.5V
  • 6-pin WSON (2mm × 2mm) package with wettable flanks
  • Active output discharge
  • Functional Safety-Capable
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: -40°C to +125°C
    • Junction temperature: -40°C to +150°C
  • Ultra-low input voltage range: 0.7V to 2.2V
  • High efficiency:
    • Dropout voltage at 1A: 140mV max
    • Specified for VIN = VOUT +150mV
  • Excellent load transient response:
    • 25mV for ILOAD = 3mA to 500mA in 20µs
  • Accuracy over load, line, and temperature: +1%, -1.25%
  • High PSRR:
    • 80dB at 1kHz (VOUT = 0.8V, IOUT = 500mA)
  • Available in fixed-output voltages:
    • 0.5V to 2.0V (in 25mV steps)
  • VBIAS range: 2.2V to 5.5V
  • 6-pin WSON (2mm × 2mm) package with wettable flanks
  • Active output discharge
  • Functional Safety-Capable

The TPS7A14-Q1 is a small, ultra low-dropout regulator (LDO) with excellent transient response. This device can source 1A with outstanding ac performance (load and line transient responses). The input voltage range is 0.7V to 2.2V, and the output range is 0.5V to 2.0V with a very high accuracy of 1% over load, line, and temperature.

The primary power path is through the IN pin and can be connected to a power supply as low as 50mV above the output voltage. All electrical characteristics (including excellent output voltage tolerance, transient response, and PSRR) are specified for input voltages 100mV greater than the output voltage, thereby yielding high practical efficiency. This regulator supports very low input voltages with the use of a higher, externally supplied VBIAS rail that is used to power the internal circuitry of the LDO. For example, the supply voltage to the IN pin can be the output of a high-efficiency, DC/DC step-down regulator and the BIAS pin supply voltage can be a rechargeable battery.

The TPS7A14-Q1 is equipped with an active pulldown circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A14-Q1 is available in a 2mm × 2mm, 6-pin WSON package.

The TPS7A14-Q1 is a small, ultra low-dropout regulator (LDO) with excellent transient response. This device can source 1A with outstanding ac performance (load and line transient responses). The input voltage range is 0.7V to 2.2V, and the output range is 0.5V to 2.0V with a very high accuracy of 1% over load, line, and temperature.

The primary power path is through the IN pin and can be connected to a power supply as low as 50mV above the output voltage. All electrical characteristics (including excellent output voltage tolerance, transient response, and PSRR) are specified for input voltages 100mV greater than the output voltage, thereby yielding high practical efficiency. This regulator supports very low input voltages with the use of a higher, externally supplied VBIAS rail that is used to power the internal circuitry of the LDO. For example, the supply voltage to the IN pin can be the output of a high-efficiency, DC/DC step-down regulator and the BIAS pin supply voltage can be a rechargeable battery.

The TPS7A14-Q1 is equipped with an active pulldown circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A14-Q1 is available in a 2mm × 2mm, 6-pin WSON package.
filter Andere Linear- und Low-Dropout-Regler (LDO) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS7A14-Q1 Automotive 1A, Low VIN , Low VOUT , Ultra-Low Dropout Regulator datasheet PDF | HTML 10.08.2026
Informationen zur funktionalen Sicherheit TPS7A14-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 30.06.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7A14EVM-095 — TPS7A14-Evaluierungsmodul für extrem rauscharmen positiven Spannungsregler

Das TPS7A14-Evaluierungsmodul (EVM) von Texas Instruments evaluiert den Betrieb und die Leistung der TPS7A14-Familie von Linearreglern. Diese EVM-Konfiguration enthält einen einzelnen rauscharmen, kleinen Linearregler für ein breites Spektrum von Anwendungen. Der Regler ist in der Lage, bis zu 1 A (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (DRV) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos