TPSM8D6B24

Name: TPSM8D6B24
Brand: TI
SKU: TPSM8D6B24
Price: 18.4 USD

AKTIV

PMBus®-Stromversorgungsmodul mit 2,95 V bis 16 V Eingängen, zweifach 25 A oder einzeln 50 A

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPSM8D6B24 2.95-V to 16-V, Dual 25-A or Single 50-A, PMBus® Buck Power Module datasheet (Rev. A) (Englisch) PDF | HTML

TPSM8D6B24

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Iout (max) (A)

25

Vin (max) (V)

16

Vin (min) (V)

2.95

Vout (max) (V)

5.5

Vout (min) (V)

0.5

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Features

Adjustable current limit, Current Sharing, Dynamic Voltage Scaling, EMI Tested, Enable, Frequency synchronization, Overcurrent protection, PMBus, Phase Interleaving, Power good, Remote Sense, Voltage Margining

Control mode

current mode

Switching frequency (max) (Hz)

1100000

Switching frequency (min) (Hz)

275000

Iout (max) (A)

25

Vin (max) (V)

16

Vin (min) (V)

2.95

Vout (max) (V)

5.5

Vout (min) (V)

0.5

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Features

Adjustable current limit, Current Sharing, Dynamic Voltage Scaling, EMI Tested, Enable, Frequency synchronization, Overcurrent protection, PMBus, Phase Interleaving, Power good, Remote Sense, Voltage Margining

Control mode

current mode

Switching frequency (max) (Hz)

1100000

Switching frequency (min) (Hz)

275000

QFM (MOW)

59

320 mm² 16 x 20

4.25 V to 16 V with PVIN tied to AVIN with internal LDO
2.95 V to 16 V with PVIN and AVIN split rail, or with external bias on VDD5
Integrated MOSFETs, inductors, and basic passives
Average current mode control with selectable internal compensation
0.5-V to 5.5-V output voltage range from through pinstrap
0.25-V to 5.5-V PMBus VOUT_COMMAND range
Extensive PMBus command set with telemetry for V OUT, I OUT, and die temperature
Differential remote sensing with an internal FB divider for < 1% V OUT error
–40°C to +125°C junction temperature range
AVS and margining capabilities through PMBus
Multi-function select (MSEL) pins for pinstrap programming PMBus defaults
Nine selectable switching frequencies from 275 kHz to 1.1 MHz
Frequency sync in and sync out
Supports prebiased output
16-mm × 20-mm × 4.3-mm, 59-pin MOW package
Create a custom design using the TPSM8D6B24 with the WEBENCH Power Designer

4.25 V to 16 V with PVIN tied to AVIN with internal LDO
2.95 V to 16 V with PVIN and AVIN split rail, or with external bias on VDD5
Integrated MOSFETs, inductors, and basic passives
Average current mode control with selectable internal compensation
0.5-V to 5.5-V output voltage range from through pinstrap
0.25-V to 5.5-V PMBus VOUT_COMMAND range
Extensive PMBus command set with telemetry for V OUT, I OUT, and die temperature
Differential remote sensing with an internal FB divider for < 1% V OUT error
–40°C to +125°C junction temperature range
AVS and margining capabilities through PMBus
Multi-function select (MSEL) pins for pinstrap programming PMBus defaults
Nine selectable switching frequencies from 275 kHz to 1.1 MHz
Frequency sync in and sync out
Supports prebiased output
16-mm × 20-mm × 4.3-mm, 59-pin MOW package
Create a custom design using the TPSM8D6B24 with the WEBENCH Power Designer

The TPSM8D6B24 is a highly integrated, easy-to-use, non-isolated DC/DC buck power module. The TPSM8D6B24 provides two 25-A independent outputs or a single stacked 2-phase 50-A output. The device has an option to overdrive the internal 5-V LDO with an external 5-V supply to enable a lower input voltage range down to 2.95 V and improve the efficiency of the converter.

The TPSM8D6B24 power module uses a proprietary fixed-frequency current-mode control with input feedforward and selectable internal compensation components for minimal size and stability over a wide range of output capacitances.

The PMBus interface with 1-MHz clock support provides a convenient, standardized digital interface for converter configuration as well as monitoring of key parameters including output voltage, output current, and internal die temperature. Response to fault conditions can be set to restart, latch off, or ignore, depending on system requirements. Back-channel communication between stacked devices enables all TPSM8D6B24 converters, powering a single output rail to share a single address to simplify system software or firmware design. Key parameters including output voltage, switching frequency, soft-start time, and overcurrent fault limits can also be configured through BOM selection without PMBus communication to support program free power up.

The TPSM8D6B24 is a highly integrated, easy-to-use, non-isolated DC/DC buck power module. The TPSM8D6B24 provides two 25-A independent outputs or a single stacked 2-phase 50-A output. The device has an option to overdrive the internal 5-V LDO with an external 5-V supply to enable a lower input voltage range down to 2.95 V and improve the efficiency of the converter.

The TPSM8D6B24 power module uses a proprietary fixed-frequency current-mode control with input feedforward and selectable internal compensation components for minimal size and stability over a wide range of output capacitances.

The PMBus interface with 1-MHz clock support provides a convenient, standardized digital interface for converter configuration as well as monitoring of key parameters including output voltage, output current, and internal die temperature. Response to fault conditions can be set to restart, latch off, or ignore, depending on system requirements. Back-channel communication between stacked devices enables all TPSM8D6B24 converters, powering a single output rail to share a single address to simplify system software or firmware design. Key parameters including output voltage, switching frequency, soft-start time, and overcurrent fault limits can also be configured through BOM selection without PMBus communication to support program free power up.

open-in-new

Andere Power modules (integrated inductor) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 4

	Typ	Titel		Datum
*	Data sheet	TPSM8D6B24 2.95-V to 16-V, Dual 25-A or Single 50-A, PMBus® Buck Power Module datasheet (Rev. A)	PDF \| HTML	13 Sep 2023
	EVM User's guide	TPSM8D6B24 Power Module Evaluation Module User's Guide	PDF \| HTML	22 Aug 2022
	Certificate	TPSM8D6B24EVM-2V0 EU RoHS Declaration of Conformity (DoC)		19 Aug 2022
	Application note	TPSM8D6C24 Module Stackability Using the TPSM8D6C24EVM-2V0 Evaluation Module	PDF \| HTML	15 Dez 2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPSM8D6B24EVM-2V0 — Evaluierungsmodul TPSM8D6B24

Das TPSM8D6B24EVM-2V0-Evaluierungsmodul (EVM) ist für die Evaluierung des Betriebs des TPSM8D6B24-Stromversorgungsmoduls in einer Konfiguration mit zwei Ausgängen konfiguriert. Der Eingangsspannungsbereich beträgt 2,95 V bis 16 V und die Ausgangsspannung für jeden 25-A-Ausgang beträgt 1,8 V und (...)

Benutzerhandbuch: PDF | HTML