Home Energiemanagement AC/DC switching regulators AC/DC controllers

UCC24610

AKTIV

Sekundärseitiger synchroner Gleichrichtercontroller

Produktdetails

Topology Active-clamp flyback, Active-clamp forward, Buck-Boost, CCM, DCM, Flyback, Forward, Half bridge, LLC, LLC half-bridge, Quasi resonant Control mode VDS sensing Features 600kHz operation, Automatic Light Load Management, Compatible with CCM, SYNC Pin for CCM, SYNC pin for CCM, Synchronous Rectifier, VDS Sensing
Topology Active-clamp flyback, Active-clamp forward, Buck-Boost, CCM, DCM, Flyback, Forward, Half bridge, LLC, LLC half-bridge, Quasi resonant Control mode VDS sensing Features 600kHz operation, Automatic Light Load Management, Compatible with CCM, SYNC Pin for CCM, SYNC pin for CCM, Synchronous Rectifier, VDS Sensing
SOIC (D) 8 29.4 mm² 4.9 x 6 VSON (DRB) 8 9 mm² 3 x 3
  • Secondary-Side Controller Optimized for 5-V Systems
  • Up to 600-kHz Operating Frequency
  • VDS MOSFET-Sensing
  • 1.6-Ω Sink, 2.0-Ω Source Gate-Drive Impedances
  • Micro-Power Sleep Current for 90+ Designs
  • Automatic Light-Load Management
  • Synchronous Wake-Up From Sleep and Light-Load Modes
  • Protection Features on Programming Inputs
  • SYNC Input for CCM Operation
  • 20-ns Typical Turnoff Propagation Delay
  • Improved Efficiency and Design Flexibility Over Traditional Diode Solution
  • May Be Biased Directly From 5-V Output
  • Minimal Component Count
  • APPLICATIONS
    • AC-to-DC 5-V Adapters
    • 5-V Bias Supplies
    • Low Voltage Rectification Circuits
    • Flyback and LLC Converters
  • Secondary-Side Controller Optimized for 5-V Systems
  • Up to 600-kHz Operating Frequency
  • VDS MOSFET-Sensing
  • 1.6-Ω Sink, 2.0-Ω Source Gate-Drive Impedances
  • Micro-Power Sleep Current for 90+ Designs
  • Automatic Light-Load Management
  • Synchronous Wake-Up From Sleep and Light-Load Modes
  • Protection Features on Programming Inputs
  • SYNC Input for CCM Operation
  • 20-ns Typical Turnoff Propagation Delay
  • Improved Efficiency and Design Flexibility Over Traditional Diode Solution
  • May Be Biased Directly From 5-V Output
  • Minimal Component Count
  • APPLICATIONS
    • AC-to-DC 5-V Adapters
    • 5-V Bias Supplies
    • Low Voltage Rectification Circuits
    • Flyback and LLC Converters
  • This GREEN Rectifier controller is a high-performance controller and driver for standard and logic-level N-channel MOSFET power devices used for low-voltage secondary-side synchronous rectification.

    The combination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also indirectly reduces primary-side losses as well, due to compounding of efficiency gains.

    Using drain-to-source voltage sensing, the UCC24610 is ideal for Flyback and LLC-resonant power supplies but can also be used with other power architectures. The UCC24610 is optimized for output voltages from 4.5 V to 5.5 V, and is suitable for use with lower and higher output voltages as well.

    The UCC24610 offers a programmable false-triggering filter, a programmable timer to automatically switch to light-load mode at light load, and a SYNC input for optional use in continuous conduction mode (CCM) systems. Protection features on TON and EN/TOFF pins prevent run-away on-time due to open-circuit or short-circuit fault conditions.

    This device is available in an 8-pin SOIC package and an 8-pin, 3.0-mm × 3.0-mm SON package with an exposed thermal pad.

    This GREEN Rectifier controller is a high-performance controller and driver for standard and logic-level N-channel MOSFET power devices used for low-voltage secondary-side synchronous rectification.

    The combination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also indirectly reduces primary-side losses as well, due to compounding of efficiency gains.

    Using drain-to-source voltage sensing, the UCC24610 is ideal for Flyback and LLC-resonant power supplies but can also be used with other power architectures. The UCC24610 is optimized for output voltages from 4.5 V to 5.5 V, and is suitable for use with lower and higher output voltages as well.

    The UCC24610 offers a programmable false-triggering filter, a programmable timer to automatically switch to light-load mode at light load, and a SYNC input for optional use in continuous conduction mode (CCM) systems. Protection features on TON and EN/TOFF pins prevent run-away on-time due to open-circuit or short-circuit fault conditions.

    This device is available in an 8-pin SOIC package and an 8-pin, 3.0-mm × 3.0-mm SON package with an exposed thermal pad.

    Herunterladen Video mit Transkript ansehen Video

    Technische Dokumentation

    star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
    Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
    Alle anzeigen 8
    Top-Dokumentation Typ Titel Format-Optionen Datum
    * Data sheet UCC24610 GREEN Rectifier™ Controller Device datasheet (Rev. C) PDF | HTML 12 Aug 2015
    More literature PCB layout guidelines to optimize power supply performance 23 Mär 2021
    Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
    Application note UCC24610 and UCC24612 SR Range Extension Guide 18 Dez 2017
    Technical article USB Wall Chargers: Conveniences and Challenges PDF | HTML 06 Okt 2015
    Application note A High Efficiency Synchronous Rectifier Flyback for High Density AC/DC Adapter 03 Jun 2011
    User guide A 90-W High-Efficiency, LLC Series-Resonant Converter 03 Nov 2010
    User guide Using the UCC24610EVM-693 03 Sep 2010

    Design und Entwicklung

    Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

    Evaluierungsplatine

    UCC24610EVM-563 — Evaluierungsmodul für UCC24610 Sekundärseitiger Synchron-Gleichrichter-Controller

    Der UCC24610EVM-563 ist ein Offline-DCM-Flyback-Wandler mit 25 W und 5 V und sekundärseitiger Synchrongleichrichtung, der vom UCC24610 gesteuert wird. Die primärseitige Steuerung wird durch den Green-Mode-Flyback-Controller UCC28610 bereitgestellt.
    Benutzerhandbuch: PDF
    Tochterkarte

    UCC24610EVM-693 — Diodenersatz-Demonstrationskarte für UCC24610 Sekundärseite Synchron-Gleichrichter-Controller

    Die UCC24610EVM-693 ist eine Diodenersatz-Demonstrationskarte, die als Ersatz für die Schottky-Diode in einem bestehenden Kundensystem verwendet wird. Diese Tochterkarte besteht aus dem UCC24610-Controller, einem FET, der für Ausgangswandler mit 5 V und 10 W geeignet ist, und (...)
    Benutzerhandbuch: PDF
    Berechnungstool

    SLUC348 UCC24610 Design Calculation Tool

    Unterstützte Produkte und Hardware

    Unterstützte Produkte und Hardware

    Viele TI-Referenzdesigns beinhalten UCC24610

    Mit unserem Referenzdesign-Auswahltool können Sie die für Ihre Anwendung und Ihre Parameter am besten geeigneten Designs durchsehen und ermitteln.

    Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
    SOIC (D) 8 Ultra Librarian
    VSON (DRB) 8 Ultra Librarian

    Bestellen & Qualität

    Beinhaltete Information:
    • RoHS
    • REACH
    • Bausteinkennzeichnung
    • Blei-Finish/Ball-Material
    • MSL-Rating / Spitzenrückfluss
    • MTBF-/FIT-Schätzungen
    • Materialinhalt
    • Qualifikationszusammenfassung
    • Kontinuierliches Zuverlässigkeitsmonitoring
    Beinhaltete Information:
    • Werksstandort
    • Montagestandort

    Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

    Support und Schulungen

    TI E2E™-Foren mit technischem Support von TI-Ingenieuren

    Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

    Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

    Videos