UCG28846
Hochfrequenz-Flyback-Wandler mit integriertem GaN-FET für bis zu 65 W Ausgangsleistungsanwendungen
UCG28846
- Integrated 750V GaN HEMT
- Dynamic QR/DCM/CCM modes of operation
- High Power density: Up to 500kHz switching frequency
- Enable low BoM cost by integration
- Remove auxiliary winding with self bias
- Integrated input and output voltage sensing
- Integrated current sense
- Integrated HV start-up
- Integrated X-cap discharge
- High efficiency and low EMI performance
- Ultra-low standby power: <30mW
- Frequency foldback and burst mode
- Valley locking
- Frequency dithering
- Switching slew rate control
- Comprehensive protection features
- Overtemperature protection
- Input and output overvoltage protection
- Short-circuit protection
- Cycle-by-cycle current limit
- Two-level over power protection with LPS
- Brownin and brownout protection
- Open feedback protection
- Flexible configurability through external resistors
- X-cap discharge and CCM mode disable
- Selectable switching slew rate
- Multiple clamping frequency settings
- Fault latch or auto-restart
- Maximum and minimum peak current ratio
UCG2883x/4x is a high frequency, quasi-resonant flyback converter with a built-in 750V GaN high electron mobility transistor (HEMT) with low Rds(on) for AC to DC power conversion. The UCG2883x/4x is designed for high power density applications, such as cell phone fast chargers and notebook adapters. The key feature of this device is the self-bias and auxless sensing scheme which eliminates the need of the auxiliary winding and simplifies the system design with higher efficiency.
The UCG2883x/4x also features intelligent mode transition (CCM/QR/DCM) to enable high efficiency across a wide power range and <30mW standby power consumption. In addition, UCG2883x/4x includes a full list of protections such as brownin and brownout protection, SCP, OVP, OPP, LPS, OFB, and OTP. The cycle-by-cycle current limit allows for fast response to the fault conditions to safeguard the system and improve the reliability. In a small 5mm × 5mm package, the UCG2883x/4x has dedicated configuration pins to offer more flexibility. Only resistors are needed to tune certain parameters for each system, enabling a platform design with a single device.
Technische Dokumentation
| Top-Dokumentation | Typ | Titel | Format-Optionen | Datum |
|---|---|---|---|---|
| * | Data sheet | UCG2883x/4x Self-Biased High Frequency QR Flyback Converter With Integrated GaN datasheet (Rev. B) | PDF | HTML | 09 Apr 2026 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
UCG28846DREVM-151 — UCG28846 – Evaluierungsmodul
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| SOIC (D) | 16 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.