CC2651R3SIPA

ACTIVO

Módulo de sistema en encapsulado inalámbrico SimpleLink™ multiprotocolo, 2.4 GHz c/ antena integrada

Detalles del producto

CPU Arm® Cortex®-M4 Protocols Bluetooth® Low Energy, Multi-standard, Proprietary 2.4 GHz, Thread, Zigbee Flash memory (kByte) 352 RAM (kByte) 32 Peripherals 1 SPI, 1 UART, 12-bit ADC 8-channel, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S Features OAD, Sleepy end device, Zigbee coordinator, Zigbee network processor Number of GPIOs 32 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators RNG Operating system FreeRTOS Type Wireless module Sensitivity (best) (dBm) -104 Operating temperature range (°C) -40 to 105 Edge AI enabled No
CPU Arm® Cortex®-M4 Protocols Bluetooth® Low Energy, Multi-standard, Proprietary 2.4 GHz, Thread, Zigbee Flash memory (kByte) 352 RAM (kByte) 32 Peripherals 1 SPI, 1 UART, 12-bit ADC 8-channel, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S Features OAD, Sleepy end device, Zigbee coordinator, Zigbee network processor Number of GPIOs 32 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators RNG Operating system FreeRTOS Type Wireless module Sensitivity (best) (dBm) -104 Operating temperature range (°C) -40 to 105 Edge AI enabled No
QFM (MOU) 50 49 mm² (7 mm × 7 mm)

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 3.60 mA active mode, CoreMark
    • 61 µA/MHz running CoreMark
    • 0.8 µA standby mode, RTC, 32KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 6.8 mA RX
    • 7.1 mA TX at 0 dBm
    • 9.6 mA TX at +5 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +5 dBm with temperature compensation

Regulatory compliance

  • Regulatory certification for compliance with worldwide radio frequency:
    • ETSI RED (Europe) / RER (UK)
    • ISED (Canada)
    • FCC (USA)

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • UART, SSI, I 2C, I 2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • T j: -40 to +105°C

Package

  • 7-mm × 7-mm MOU (32 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 3.60 mA active mode, CoreMark
    • 61 µA/MHz running CoreMark
    • 0.8 µA standby mode, RTC, 32KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 6.8 mA RX
    • 7.1 mA TX at 0 dBm
    • 9.6 mA TX at +5 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +5 dBm with temperature compensation

Regulatory compliance

  • Regulatory certification for compliance with worldwide radio frequency:
    • ETSI RED (Europe) / RER (UK)
    • ISED (Canada)
    • FCC (USA)

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • UART, SSI, I 2C, I 2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • T j: -40 to +105°C

Package

  • 7-mm × 7-mm MOU (32 GPIOs)
  • RoHS-compliant package

The SimpleLink™ CC2651R3SIPA device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, TI 15.4-Stack (2.4 GHz). The CC2651R3SIPA is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2651R3SIPA is an ultra-compact 7-mm x 7-mm certified wireless module 2.4 GHz with integrated antenna, DCDC components, Balun, and high frequency crystal oscillator.

The CC2651R3SIPA has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. The CC2651R3SIPA supports +5 dBm TX at 9.6 mA in the 2.4-GHz band. CC2651R3SIPA has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2651R3SIPA has a low sleep current of 0.9 µA with RTC and 32KB RAM retention.

TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2651R3SIPA device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCU. CC2651R3SIPA is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

The SimpleLink™ CC2651R3SIPA device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, TI 15.4-Stack (2.4 GHz). The CC2651R3SIPA is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2651R3SIPA is an ultra-compact 7-mm x 7-mm certified wireless module 2.4 GHz with integrated antenna, DCDC components, Balun, and high frequency crystal oscillator.

The CC2651R3SIPA has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. The CC2651R3SIPA supports +5 dBm TX at 9.6 mA in the 2.4-GHz band. CC2651R3SIPA has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2651R3SIPA has a low sleep current of 0.9 µA with RTC and 32KB RAM retention.

TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2651R3SIPA device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCU. CC2651R3SIPA is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
CC2652RSIP ACTIVO Módulo inalámbrico multiprotocolo system-in-package SimpleLink™ de 2,4 GHz con memoria de 352 KB Option with additional memory and external antenna

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos CC2651R3SIPA SimpleLink™ Multiprotocol 2.4 GHz Wireless System-in-Package Module with integrated Antenna & 352-KB Memory datasheet (Rev. B) PDF | HTML 17/08/2023
* Guía del usuario CC13x1x3, CC26x1x3 SimpleLink™ Wireless MCU Technical Reference Manual PDF | HTML 14/02/2022
* Errata CC2651R3SIPA Errata (Rev. A) PDF | HTML 29/06/2022
Asesoramiento en ciberseguridad Invalid Bluetooth® LE Data Length Extension (DLE) Parameter Leading to DoS PDF | HTML 28/05/2026
Asesoramiento en ciberseguridad Denial of Service during Bluetooth LE authentication and connection PDF | HTML 28/05/2026
Nota sobre la aplicación CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 6/08/2024
Nota sobre la aplicación CC2651R3SIPA OEM Integrators Guide PDF | HTML 19/08/2022
Certificado CC2651R3SIPA UK Doc (Certification) 24/06/2022
Nota sobre la aplicación Configuring Bluetooth LE devices for Direct Test Mode PDF | HTML 25/02/2022
Certificado CC2651R3SIPA CE DoC (Certification) 25/02/2022
Nota sobre la aplicación RF PCB Simulation Cookbook 9/01/2019
Nota sobre la aplicación TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 28/02/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP-CC2651R3SIPA — CC2651R3SIPA Kit de desarrollo LaunchPad™ para el módulo SIP inalámbrico multiprotocolo SimpleLink™

Este kit de desarrollo LaunchPad™ se utiliza para acelerar el desarrollo con el módulo inalámbrico multiestándar SimpleLink™ CC2651R3SIPA de sistema en encapsulado con antena integrada, MCU con soporte para Bluetooth® 5 Low Energy (LE) y protocolos basados en IEEE 802.15.4 incluyendo aplicaciones (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Productos y hardware compatibles
Sonda de depuración

TMDSEMU110-U — Sonda de depuración XDS110 JTAG

El XDS110 de Texas Instruments es una nueva clase de sonda de depuración (emulador) para procesadores integrados de TI. El XDS110 sustituye a la familia XDS100, al tiempo que es compatible con una mayor variedad de estándares (IEEE1149.1, IEEE1149.7, SWD) en un único pod. Todas las sondas de (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Sonda de depuración

TMDSEMU200-U — Sonda de depuración XDS200 USB

El XDS200 es una sonda de depuración (emulador) que se utiliza para depurar dispositivos integrados de TI. Para la mayoría de los dispositivos, se recomienda utilizar el XDS110 (www.ti.com/tool/TMDSEMU110-U), que es más nuevo y de menor costo. El XDS200 es compatible con una amplia variedad de (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Productos y hardware compatibles
Kit de desarrollo de software (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

Los kits de desarrollo de software (SDK) de baja potencia de SimpleLink™ son compatibles con la familia de productos CC13xx, CC23xx, CC26xx y CC27xx. Juntos, estos SDK proporcionan paquetes de programas completos para el desarrollo de aplicaciones Sub-1 GHz y 2.4 GHz que incluyen compatibilidad con (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

ARM-CGT — Herramientas de generación de código Arm®: compilador

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Productos y hardware compatibles
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles
Herramienta de programación de software

FLASH-PROGRAMMER — SmartRF Flash Programmer

SmartRF Flash Programmer 2 se puede utilizar para programar la memoria flash en MCU inalámbricas RF de bajo consumo basadas en ARM de Texas Instruments a través de las interfaces serie y de depuración. Consulte la lista de productos compatibles para verificar la compatibilidad. Uniflash también se (...)

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles
Herramienta de programación de software

UNIFLASH — Herramienta de programación flash UniFlash

UniFlash forma parte del amplio ecosistema de desarrollo CCStudio™ de TI y es una herramienta de software diseñada para programar la memoria flash integrada en los microcontroladores y dispositivos de conectividad inalámbrica de TI, así como la memoria flash integrada en los procesadores de TI. (...)

Productos y hardware compatibles
Soporte de software

RF-RANGE-ESTIMATOR — RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
Productos y hardware compatibles
Herramienta de cálculo

BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices

This tool is used to calculate Bluetooth Low Energy power consumption estimates for various use cases on TI Bluetooth devices. The calculator includes both advertising and peripheral use cases with the ability to configure different use case profile parameters. The calculator outputs an estimate (...)
Productos y hardware compatibles
Herramienta de cálculo

Z-STACK-CALC — Z-Stack Power Calculator

Esta herramienta se utiliza para permitir a los usuarios del programa SimpleLink™ Z-Stack™ analizar el perfil de alimentación del sistema para un dispositivo final inactivo dentro de una aplicación Zigbee. Esta calculadora permite al usuario evaluar la vida útil potencial de la batería del sistema (...)
Productos y hardware compatibles
Certificación

CC26XX-REPORTS — CC26xx Regulatory Certification Reports

¿Está buscando soporte para la certificación del módulo CC26xx? CC26xx-CERTIFCATION proporciona información relevante y soporte para la certificación exitosa de su producto. En esta página encontrará los informes de certificación más recientes de nuestros módulos, así como de nuestras placas de (...)
Productos y hardware compatibles
Herramienta de diseño

3P-WIRELESS-MODULES — Herramienta de búsqueda de módulos inalámbricos de terceros

La herramienta de búsqueda de módulos inalámbricos de terceros ayuda a los desarrolladores a identificar productos que cumplan con las especificaciones de sus equipos finales y a adquirir módulos inalámbricos listos para la producción. Los proveedores de módulos de terceros incluidos en la (...)

Productos y hardware compatibles
Herramienta de diseño

SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices

El proceso de revisión del diseño de hardware de SimpleLink le ofrece la posibilidad de ponerse en contacto, de forma personalizada, con un experto en la materia que puede ayudarlo a revisar su diseño y proporcionarle valiosos comentarios. Aquí encontrará un sencillo proceso de 3 pasos para (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
QFM (MOU) 50 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos